Electronics Forum | Tue May 01 23:06:07 EDT 2001 | djarvis
Mate, I'd love to but we are not allowed to use ENIG (Empaestic Noumenal Ideopraxistical Gunk) here so I really couldn't enter into the debate. Surely people realise that your average SMT boffin is a mental case in a blue coat. I looked up "SMT-engin
Electronics Forum | Mon Apr 30 10:48:10 EDT 2001 | CAL
oktayunsal- Machines are your secondary problem. Knowing and understanding SMT process is your biggest obstacle. SMT process involves Electrical, Chemical, Industrial, and mechanical engineering disciplines.As a start I would begin with IPC related
Electronics Forum | Wed May 02 12:07:00 EDT 2001 | mparker
I was a bit amused the way you "tanked" that dip John. I mean you skewered him without benefit of remoulade, that puppy was tarred and feathered, chopped, chromed, toasted!!! I was a bit surprised that you chose to get back into the thread, it didn't
Electronics Forum | Tue Nov 28 15:06:59 EST 2000 | rabell
We have recently moved our "ESD: See it! Believe It! Control It!" product to a network version. This particular course is aimed at engineers and technicians, and these people typically already have a computer on their desktop, so providing the train
Electronics Forum | Thu May 03 18:13:40 EDT 2001 | johnthor
what are these kids doing in the dark with band-aids anyway? I'll bet you could get the same effect with Kapton tape (maybe yellow light?) Seriously, I use the IIT proframe Dave mentions down to 25 mil but have gone back to a permanently mounted foil
Electronics Forum | Fri May 04 12:28:12 EDT 2001 | slthomas
We have had some success printing 20mil pitch with our IIT Proframe. It takes some babysitting, and you don't want your operators to be changing these things out every hour or you'll be buying lots of them. Pulling tension in one direction gives r
Electronics Forum | Thu May 03 10:16:45 EDT 2001 | caldon
I like the Glenbrook x-ray systems. Simple and easy to use and they have a great support staff. We are using the Jewel Box 70 and are extremely pleased with it. They have complimentary software for analyzing the balls that is excellent. For the price
Electronics Forum | Mon May 07 09:44:56 EDT 2001 | wister
Normally,titration kit is used for low solid flux,provides a more accurate method to determine the flux concentration so as to assure consistent soldering results.There are three chmicals in the process.test kit solution,indicator and your flux.add d
Electronics Forum | Mon May 07 08:46:18 EDT 2001 | CAL
Searching the IPC website is a good start. http://www.ipc.org Some standards you may want to look over are.... IPC 600, IPC 610, J-STD-001 "riveting and circuit cards into metal shelf" definitely has my curiosity level elevated. Since you know your
Electronics Forum | Tue May 29 20:22:19 EDT 2001 | davef
Well, no fault with your calculations from here. They appear to be correct. [Logic doesn't appear to be off to far off base, either. An epiphany, eh?] As mentioned in an earlier posting on this thread, consider following the recommendations of IP