Electronics Forum | Fri Jul 18 07:14:10 EDT 2003 | davef
BGA - Ball grid array QFP - Quad flat pack As a bonus, look here to learn more SMT terms and definitions http://www.smtnet.com/library/index.cfm?fuseaction=content_terms1 There are other listings of definitions and terms in the SMTnet Library. Lo
Electronics Forum | Fri Jul 18 10:04:32 EDT 2003 | jseagle
Hi all, I am looking for some recommendations on Underfill Equipment. Such as vendors, pumps, material, etc... We will be initially underfilling a 10mm x 10mm, 0.8mm pitch, 0.35mm ball uBGA on FR4 and going down in size and pitch from there. And
Electronics Forum | Wed Jul 23 10:44:40 EDT 2003 | ADAM
Guys I was wondering if anybody out there had any suggestions for cleaning populated pcbs that have been contaminated with salty sea water . There is alot of evidence of white residues and salt deposits on the pcb's. I've tried putting them through
Electronics Forum | Tue Jul 29 05:04:20 EDT 2003 | gregoryyork
Dear adam Sounds to me like it may not be Salt water contamination or even flux residue's, as both of these are commonly cleaned semi aqueosly or with IPA. Have you considered it may be Talcum powder used as fillers in solder resist, mineral salts
Electronics Forum | Wed Jul 23 17:07:27 EDT 2003 | dbdavis
Dear Colleagues, I'm am experiencing some problems with nonwetting of primarily 0603 packages. The problem is infrequent but occures just enough for my QA dept. to notice. My reflow profile seems to be correct and the vast majority of parts solder f
Electronics Forum | Thu Jul 24 00:39:40 EDT 2003 | MA/NY DDave
Hi, If the failure rate is a lot higher than all the other components including ones similar to the 0603's than you won't be making a big deal. It is all relative. My only thought is to run a DOE with 0603's from different manufacturers and see if
Electronics Forum | Fri Jul 25 08:22:02 EDT 2003 | cabjerk
Hi All; Does anyone have any experience with eSMT software for Fuji machines? (replacement for MCS) Here is the web site for the software http://strony.wp.pl/wp/esmt/ I'm having problems with the software and an IP1. The Error on the machine is E
Electronics Forum | Fri Jul 25 14:20:04 EDT 2003 | stefwitt
It looks like pretty nice software to me. However, the web site had ~ 1400 visitors and the company is located in Poland. I fear there are not many users to answer your question. In my own attempt, I would look for a logical explanation to say, that
Electronics Forum | Sat Jul 26 11:40:09 EDT 2003 | mantis
All, Is it possible and reliable to replace bga's on Enig boards with out suffering from mass fallout due to blackpad defect.I have a couple of boards requiring bga replacment but i have been told that it is not possible to replace them reliable that
Electronics Forum | Tue Jul 29 09:28:24 EDT 2003 | russ
Why would you get black pad from rework? I could be wrong but once the pad has accepted solder from the first reflow process wouldn't that eliminate the possibility of a latent finish defect? I am curious. We do perform rework on ENIG all of the tim