Electronics Forum | Fri Aug 25 11:29:09 EDT 2006 | mika
Thanks all for Your input. The thing is that we want to avoid to go in to the pattern program and change the height in the middle of running a board. For ex. We start a product, feeders are loaded in advance in the feeder preparation area, operator
Electronics Forum | Sun Aug 20 02:31:18 EDT 2006 | daxman
Last week, when we turned on our IP3, we received an error on our IP3, which read "Fatal Error with VP Turn Power Off" We had been running product the day before, and the day after we received this error. The function keys are locked and will not w
Electronics Forum | Thu Aug 24 08:49:20 EDT 2006 | nodlac
Hi Jerry- The belt splice kit we used were made by Eagle Belting Company (Now Fenner). You are correct in the splice process...one other thing we did was trim the extra "roll Back" or flash of melted material. I prefer the Mini or regular but splic
Electronics Forum | Fri Aug 25 07:38:12 EDT 2006 | CL
Hi CP, I used to work for a flex circuit manufacturer. I am at a CM now and am we have started building RoHS production status assemblies. I personally think flex circuits will have a difficult time with the required temps for RoHS. I spoke to someo
Electronics Forum | Tue Aug 22 03:04:07 EDT 2006 | PP
Any help/suggestion is much appreciated I am doing lots of BGA Reworks from a small uBGA with a few balls to a large BGA with over 1500 balls. The reworks have been done on SRT 1100 Series Machine for many years. SRT 1100 Machine is good for the c
Electronics Forum | Thu Aug 24 19:26:07 EDT 2006 | darby
Dave, Cygnal was taken over by Silabs. I based my design on the second link that you provided. Tell me folks, are you using one large pad with only the stencil having the grid, or are you actually breaking up the large pad into grids with mask around
Electronics Forum | Tue Aug 22 13:13:30 EDT 2006 | slthomas
We are a low volume (100k-150k parts per month) high mix shop that is equipped with a couple of Quad IVc's. The machines meet our overall capacity needs but can not give us the quick turns we need if we get hit with multiple large setups at once.
Electronics Forum | Tue Aug 22 15:57:17 EDT 2006 | slthomas
As far as room goes, I have to talk my boss into getting rid of some other crap around here before looking at the Mydata. The room is there, it's just occupied by stuff we NEVER use. My understanding of the TP-9 is that it's considered flexible but
Electronics Forum | Tue Aug 22 17:03:32 EDT 2006 | pms
Steve, Be careful with that TP-9.......... Mydata will support the machine (as long as you pay a registration fee, I believe), but no support for real old software versions. Make SURE it has at least software version 1.6 or above. If not, the magaz
Electronics Forum | Mon Aug 28 18:16:17 EDT 2006 | fastek
Sure Base....go ahead and trust your company's livelihood to make money on a vendor that is either going out of business or is on the block to be sold. These are not cars or luxury items of convenience we are talking about here. In many if not all c
