Electronics Forum | Sat Mar 17 07:27:37 EDT 2007 | davef
Guards are used to limit the interaction between circuits. Look here: http://www.evaluationengineering.com/archive/articles/1106/1106the_art.asp
Electronics Forum | Sun Mar 11 05:32:09 EDT 2007 | himanjim
Hi friends I wanna design a FM receiver using CXA1619M/S IC chip but can't find any circuit digram on internet....can anybody of u guide me?
Electronics Forum | Mon Mar 12 07:48:45 EDT 2007 | Rob
Hi Himanshu, if you go to http://www.icmaster.com and type in CXA1619M, you will get the full data sheet, which includes 2 applications circuits and 2 board layouts. Please note that this is an old product. Good luck, Kind regards, Rob.
Electronics Forum | Sun Mar 11 08:42:25 EDT 2007 | davef
Search the fine SMTnet Archives, while you're waiting for others to respond. For instance: http://www.smtnet.com/forums/Index.cfm?CFApp=1&Message_ID=46565
Electronics Forum | Mon Mar 12 13:13:11 EDT 2007 | jseagle
We are going to try clips from Autosplice, the small clips come on tape and reel which are placed by the machine and then reflowed. After reflow we install the shield.
Electronics Forum | Mon Mar 12 18:20:07 EDT 2007 | davef
You should tell your customer that they're very nice people, but the purpose of RF shields is reduce RF emissions, not to be a air or gas tight enclosure. The requirements of hermeticity are wholly different than those of RF shielding. Do they want
Electronics Forum | Tue Mar 13 21:28:16 EDT 2007 | davef
Try this: http://www.accutroninc.com/download/ict.pdf We have no relationship, nor receive benefit from the company referenced above.
Electronics Forum | Tue Mar 13 12:24:11 EDT 2007 | Grant
Hi, Yes, a lot of this comes down to budget. Are you doing a "line" or is your budget only allow for batch processing? You will need to provide some more info. Grant
Electronics Forum | Tue Mar 13 12:54:58 EDT 2007 | hynergy
You required the process control equipments. 1) Paste Height Checker: To measure the solder paste thickness after printing. 2) Temperature Profiler: To measure the reflow oven temperature whether is within the control spec.
Electronics Forum | Thu Mar 15 12:44:48 EDT 2007 | ck_the_flip
Have any of you seen this? http://www.seattlerobotics.org/encoder/200006/oven_art.htm