Electronics Forum | Sat Feb 17 13:15:09 EST 2007 | gregcr
Hi All, We have a handfull of GSM's here and some are newer than others. I was wondering what the options are as far as upgrades to the VME chasis. We have our oldest running with EPC-4, EPC-5, EPC5A and so on.... Can newer EPC units be used in t
Electronics Forum | Sat Feb 17 14:21:54 EST 2007 | Muhammad Haris
Hi All, I am using YV100Xg YAMAHA Pick and Place Mounter Machine and I am facing a tilting problem of PLCC 84 and QFP 240 pins ICs. I deeply checked about their vision files and place them on the double sided tape and found them ACCURATE on their pad
Electronics Forum | Mon Feb 19 10:55:14 EST 2007 | John S.
We're looking into a new profiler and potentially one of these wave rider tools. I found some old threads, but nothing very recent. We tried the Malcolm tool a long time ago, but we weren't very happy with it. I'm sure I can get a demo unit and co
Electronics Forum | Mon Feb 19 11:14:49 EST 2007 | realchunks
WaveRiders do work well. But they just measure, do they do not adjust anything. It's up to you or your staff to interpret and adjust your machine accordingly. It�s one of those tools that is affective, but only to the extent of you�re willing to u
Electronics Forum | Mon Feb 19 11:43:53 EST 2007 | ck_the_flip
I've used ECD's WaveRIDER and TIC's Wave Optimizer, and some people have sworn by Malcom's wave reader as well (if you look at all the past threads). We HAD an optimizer here in our shop, but somebody bwoke it. :-( As for evaluating these, see Chu
Electronics Forum | Tue Feb 20 04:21:30 EST 2007 | Base
According to my assumptions you're looking for a 40kCph line. (300 days of 8hrs at 75% efficiency) What's the parts mix? I would say (and these are my favourites) Assembl�on AX-5 with 10 wide robots. This will give you 50k output with the ability to
Electronics Forum | Wed Feb 21 08:33:37 EST 2007 | CL
Good Morning Everyone, I just wanted to get a feel for what other Contract Mnufacturers are doing. Do you allow a production PCB assembly with glued SMT components to be wave processed more than once? (e.g. the first pass did not produce acceptable
Electronics Forum | Wed Feb 21 09:23:11 EST 2007 | electronhose
Probably not on the whole job, but maybe the 1-5 boards that were used for setup control. Especially MELF's are not super process tolerant. I'd probably allow standard caps and resistors one more time, but I'd need some test data to back it up. I'd
Electronics Forum | Wed Feb 21 09:36:10 EST 2007 | hanza
Hello, We are planning to buy a desktop AOI system and were able to experiment with a Mirtec MV-2 system. Results were pretty good, except for some types of solder inspection. I am wondering if anyone has some experience with the Mirtec MV-3 (3D 5-
Electronics Forum | Tue Feb 27 11:01:37 EST 2007 | ratsalad
Larry has lots of experience, if you have been around the forum for a while you may remember some of his other suggestions. Now I wish I had asked the question before jumping in to Pb-free 1 1/2 years ago. We've been using the same ovens to run bot