Electronics Forum | Wed Aug 29 11:22:11 EDT 2007 | gmoritz
Thank you for the answers to my questions. We are running two-lead LED insertions. Most of our PCBs are square between 9" and 14.25" in a 16 x 16 array, so pitch ranges from 0.52" to 0.90". Further complications are that most of the boards have th
Electronics Forum | Tue Sep 04 10:37:52 EDT 2007 | slthomas
I could help you with the SET features if I saw them. It's been about 4 years so I don't remember them off the top of my head. What you would do (nutshell) is get your non-rotated insertions dead center, then step through to a rotated insertion until
Electronics Forum | Thu Sep 06 11:56:24 EDT 2007 | gmoritz
> x/y position of that lead does > > not change as the head rotates." > Heh-heh. You'd think so, wouldn't you? > Have you observed this with a magnifying glass? Heh-heh yourself. I (think) I know better than to think that it would withstand tha
Electronics Forum | Sun Sep 02 07:55:19 EDT 2007 | lennielly
Hi every one I would like to have some inputs here,I would be very appreciated if you can give your suggestion; Currently we are working on 2 underfilled BGAs with SRT-1800 rework station(hot air type),one is mounted on a single sided PCB whereas the
Electronics Forum | Tue Sep 04 10:27:33 EDT 2007 | rgduval
I haven't experienced this problem, exactly, but I have had issues with noise in digital circuits that appear to have gone away with touch up. The problem was that the customer blamed the noise issue on the solder quality, and he pointed to the fact
Electronics Forum | Tue Sep 04 10:48:49 EDT 2007 | lloyd
How do other people check their solder joint strength after a process change? For example, say you are getting wetting problems and you feel that a change to the reflow profile may help, or perhaps a slight change to the stencil aperture to reduce so
Electronics Forum | Wed Sep 05 10:59:02 EDT 2007 | slthomas
What's sad is, it really happened. I won't bore you with the details again. ;) Lloyd, I would love to have a nice Hi Scope too (I think Cchunks works for one of those big champagne and caviar corporate entities ;)) but if you can't swing it, at leas
Electronics Forum | Tue Sep 04 15:08:51 EDT 2007 | floydf
We have a job that has through hole components on the top, and one 44 pin j leaded PLCC on the bottom. Presently we put the through hole parts in, run it throught the wave, dispense paste on the PLCC pads, and then apply hot air. Someone suggested we
Electronics Forum | Fri Sep 07 17:38:23 EDT 2007 | bentigano
Hello James. I've got a YesTech YTV-2050 system at work with one top-down camera, and 1 side-view camera for each of the four sides. I do have the side view cameras being used for automated side inspection. There are some parts with markings that are
Electronics Forum | Thu Sep 06 15:36:27 EDT 2007 | kpm135
My company recently aquired an asymtek coating machine and I have been using Humiseal 1B31, an acrylic coating, in it to coat all the boards given to me. They have now come to me and asked if it is possible to run Humiseal 1A33, a urethane coating, t