Electronics Forum | Thu Sep 29 10:34:46 EDT 2011 | leemeyer
I recently bought a used Universal conveyor #5362I. All I need it to do is pass through boards from 1 machine to the next without operator intervention. The only way I can get it to accept a board from the upstream machine is by pushing the yellow bu
Electronics Forum | Fri Oct 07 17:22:16 EDT 2011 | davef
Questions are: * Pressure? * Heating ramp? * Solder alloy? * Solder preform or paste reflow? [We have more, depending on your answer] * 0.5 mm is pretty tight. Talk about tooling holes and measures to prevent flexing of the assembly * In time, heat a
Electronics Forum | Sat Oct 01 09:15:23 EDT 2011 | whitewing
If they sold you the lens and refuse to support it I'd demand your money back. I'd never deal with a company with this sort of policy - who would buy new kit knowing that the potential resale value is decimated by the manufacturer's policy of ripping
Electronics Forum | Tue Oct 04 15:26:52 EDT 2011 | gregcr
Hi All, I have a couple Simplimatic Shuttlegates that I belive need the program reloaded. These use the old Seiberco motor controllers. I have a couple known good Seiberco controllers, but I belive they require a program to be loaded. If anyone k
Electronics Forum | Wed Oct 05 13:30:01 EDT 2011 | leemeyer
We are required by most of our customers to apply a serial # to the boards that we build. As the PC boards have been getting smaller and open areas on the board are getting scarce we have been forced into using smaller and smaller labels. I am lookin
Electronics Forum | Thu Oct 06 09:30:10 EDT 2011 | leemeyer
We use various Zebra printers for 2D barcodes > with great success. We also have had great sucess with our Zebra's. I think that the labels that we are trying to print now on smaller than the printer (170xii) was designed to handle. I am looking f
Electronics Forum | Sat Oct 08 23:17:14 EDT 2011 | peteralmendrala
Im a technician in smt specializing fuji cp6 series and juki 750 and 730. Know i wil be living my job and will move to other company specializing yamaha yv100. can somebody lend me a calibration and programming manual of this machine? Thanks in adva
Electronics Forum | Wed Oct 12 08:02:31 EDT 2011 | emeto
It looks like a nozzle size issue. Make sure you have the right nozzle size for the part as well as the right feeder.I think that if the machine takes the parts from the feeders, it can't be feeder problem. Usually parts will jump out of the feeder
Electronics Forum | Tue Oct 11 09:30:17 EDT 2011 | davef
UL746 Standard for Polymeric Materials is used for testing plastic enclosures used in electronic assemblies. Look here http://www.ul.com/global/eng/pages/corporate/contactus/faq/industries/plastics/ We're unaware of UL involvement in solder. Bare b
Electronics Forum | Fri Oct 14 16:45:14 EDT 2011 | proy
I have a wave solder machine I am replacing, it is full of tin lead 63/37. I would like to sell off in 100lb lots. A certificate of composition will be provided. Price is $6.50/lb not including shipping from Toronto Canada. 100lb lots minimum