Electronics Forum | Tue Sep 18 21:37:06 EDT 2012 | vergara1
Hi Manoel, I want to make sure I understand what you are talking about; reading the reply,along with your replys it almost sounds as if we are not talking about the same thing. In your picture I'm seeing a SMT diode correct? You are talking about th
Electronics Forum | Fri Sep 14 03:43:16 EDT 2012 | mili
Hello!I have a delta wave with these problems:offtime of lambda wave tracking is too long and when modify offtime setting to a negative value for a fast stop on tracking position of lambda wave, the wave pass on stand-by with a delay of half of leg
Electronics Forum | Fri Sep 14 10:53:25 EDT 2012 | mili
In Setup menu there is a last option Debug. Debug choosing a window with Rack0, Rack1, Rack2, Rack3, log RS485 opens. Choosing rack0 a window with parameters S3 boxes 1 to 12 Input and certain boxes are checked, S4 Output from 1-8, from 1-8 S5 Outpu
Electronics Forum | Fri Sep 14 04:11:16 EDT 2012 | mili
Hello!I have a delta wave with these problems:offtime of lambda wave tracking is too long and when modify offtime setting to a negative value for a fast stop on tracking position of lambda wave, the wave pass on stand-by with a delay of half of leght
Electronics Forum | Thu Oct 25 13:35:47 EDT 2012 | davef
Here's a paper that may help http://www.ipcoutlook.org/pdf/assembly_challenges_bottom_terminated_ipc.pdf Temperature Impact * Profile didn’t have a significant impact on voiding. * Voids slightly increased with higher temperature. Reflow Atmosp
Electronics Forum | Tue Oct 09 11:42:42 EDT 2012 | cyber_wolf
Actually the correct way to fix this is to carefully remove the belt on the rear of the machine that connects the left and right rail lead screws together. Square the rails then carefully re-install the belt *without turning either of the lead screws
Electronics Forum | Wed Sep 26 10:05:41 EDT 2012 | testbloke
Although we do not have any soldering issues with our OSP PCB's, I am trying to establish clear rules with regards pcb storage and shelf life. Our PCB's are supplied in metalised moisture barrier bags but without desicant, our current rules as follow
Electronics Forum | Mon Oct 08 09:59:16 EDT 2012 | swag
We run both. We just bought a new Horizon 03iX with all the bells and whistles. Nice machine, great install and training. We've already saved a ton of labor using the adhesive dispense system. Both brands are very good. The MpM's are built heavi
Electronics Forum | Thu Oct 11 17:25:07 EDT 2012 | davef
I don't know dip about operating your new printer, but the following people own HTI printers and might be willing to help you [don't tell them that I sent you] * GRT Electronics, 3805 Beryl Road, Raleigh, NC 27607; 919-821-1996 General Manager/Owner:
Electronics Forum | Fri Oct 12 11:18:57 EDT 2012 | srgbarba
Hi, I want to ask if someone saw the combo process at smt lines for panel array (bot & top per both sides), I just perform some experiments and it works perfectly, and I validate the T hus (Cg/Pa) and no one component were dropped after the 2nd reflo