Electronics Forum | Tue Sep 18 20:01:46 EDT 2012 | vergara1
Thanks for the advice. We have only done one PCB > with HMP solder and did not use preheating, but > I've been wondering if it would have been helpful > since we had some trouble getting the solder to > flow. If you have any more specific advice
Electronics Forum | Mon Jan 23 22:53:31 EST 2012 | davef
= 0.66 aperture opening to the stencil wall has been shown to provide the best transfer efficiency and repeatability of the deposited paste. Values from 0.66 to 0.8 insure a good paste release from the stencil. The biggest impact on area ratio is the
Electronics Forum | Thu Mar 22 10:07:48 EDT 2012 | hussman
We chose the MPM over the DEK. We did real world comparison in our factory with both machines almost side by side last year. MPMs offer a real windows based software that basically takes the operator out of the equation. Besides the basic screen p
Electronics Forum | Mon Aug 27 08:58:24 EDT 2012 | rway
Reese, > > We would agree about the value of an > ICT system, in a general manufacturing > environment. However, a couple of notes > apply: > > 1. ICT isn't a catch-all, either, and > should be used to verify the process, not > validate it.
Electronics Forum | Thu Aug 30 18:38:31 EDT 2012 | davef
Check these reports, books, documents ... • ESD: From A To Z - Page 255 - Google Books Result books.google.com/books?isbn=0412083817 John M. Kolyer, Donald Watson - 1995 - Technology & Engineering - 338 pages Long hair will constantly recharge as it
Electronics Forum | Tue Nov 13 00:05:11 EST 2012 | eadthem
Typical problems with our heller 1707 EXL would be blower issues. We have almost replaced every blower on the top sense purchase. Fortunately Heller is very good about honoring there warranty on the blowers which is quite long, Might be lifetime not
Electronics Forum | Sat Apr 21 07:05:32 EDT 2012 | doremi
Hello sergio, Probably it is too late to answer to your question, but I can not withstand to say some good words about Omron AOI. I'm located in Europe, 6 years ago our company wanted to make some Japanese manufacturers like Mazda & Toyota our client
Electronics Forum | Tue Oct 16 10:06:46 EDT 2012 | jackofallmasterofnone
Hello all, First off let me start by introducing myself. My name is Dan and I work for a contract manufacturer. During a job search I had heard from a previous co-worker that there was a packing job available at the facility where he now worked. I
Electronics Forum | Thu Oct 18 11:59:38 EDT 2012 | jackofallmasterofnone
1) At this time we do not have a design engineer. I have contacted the PCB manufacturer about changing the drill file to close up the diameter on the holes a bit. This should allow the wings on the leads of the component to rest on top of the holes i
Electronics Forum | Thu Jun 28 09:11:19 EDT 2012 | davef
I though this was a good article on picking a part numbering scheme and since you weren't getting any takes figured I throw this out there and maybe get a conversation going. Part number system: How to get started Filed under: Item and File Man