Electronics Forum | Thu Aug 13 19:54:01 EDT 2015 | aemery
The camera assembly is designated as X23; the stencil & board lighting as well as the camera video signal pass through the DB9 connector at the camera. There is a ribbon cable in the vision gantry tray that carries both to the box on the left side o
Electronics Forum | Fri Oct 16 13:54:20 EDT 2015 | aemery
CharlieM hit it on the head! As a former Field engineer for an equipment OEM and now for my own business, the first thing you will hear when you walk on to the factory floor is how bad the last guy was if he didn't do a good job. What most engineer
Electronics Forum | Tue Dec 22 12:08:06 EST 2015 | aqueous
The overwhelming technology used in post-reflow cleaning of electronic assemblies is aqueous. Prior to the 1990's, solvents and vapor degreasers dominated the cleaning industry. After the popular solvents were banned via a United Nations treaty, alte
Electronics Forum | Wed Feb 11 00:34:42 EST 2015 | comatose
There isn't going to be much worthwhile used equipment out there if you mean true jetting - it is a pretty recent process. There are lots of used stencil printers out there, so from an up-front cost perspective, stencil wins. Jetting is slow. A hig
Electronics Forum | Fri May 15 21:39:48 EDT 2015 | jlawson
Reflow.. 1.Rehm (Germany) - Best in Class Best overall process stability heating system ( Alot of makers have started to copy there VX heating arrangement ). COnveyor chains can be a bit more attention in terms of maintenance on rehm , but if foll
Electronics Forum | Mon Aug 24 10:26:39 EDT 2015 | derrikf
I've recently pushed the company I work for to switch to a halogen-free solder that our supplier carries, Kester's NP 505 HR, prior we were using Kester NXG1. NP 505 HR performs great on the screen, we have a lot of down time in between prints (we d
Electronics Forum | Fri Sep 25 20:11:58 EDT 2015 | ercdave1
Thank you for taking the time to read this post. I hope I can get some help since I am at the point where I don't know what to do. I have a Q block Universal GSM2 having some issues. I am getting an error message that reads. "spindles Not seen for
Electronics Forum | Tue Sep 29 09:39:02 EDT 2015 | rgduval
Hey, David, For service, check out 4TechUSA over in Detroit. It's not Chicago, but, you're closer to Detroit up there than I am down here in Houston :) For your issue....do you have access to the UIC Knowledge Base? The first issue I found in the
Electronics Forum | Thu Feb 19 11:47:06 EST 2015 | dad23honu
I had someone in another forum tell me that my assembly would fail if I had a few solder joints over the 1000ppm RoHS threshold, with all other solder joints within spec. So, I followed up with this illustration. Please let me know what you think.
Electronics Forum | Wed Aug 12 18:06:33 EDT 2015 | bnorton
Here's the end of Logicomm capture on Force COMM2 where it starts the Lantern system not active messages. Couldn't get attach to work. Startup and earlier .ldx file loading omitted ulLoadTasks(): Opening the RFS pseudo device driver ... ulLoadTas
