Electronics Forum | Fri Oct 17 06:44:32 EDT 2014 | hemant_pang23
We are doing hand soldering for the 'BATTERY LITHIUM COIN CELL 3V CR 2032 but now we want do the soldering through wave soldering process ,for avoiding the shortckt only one pin will get solder through wave process and other pin will be soldered manu
Electronics Forum | Mon Jun 12 10:07:08 EDT 2006 | mkehoe@sipad.net
Can someone look this over and see if this helps?? ****************************************************** I read the e-mail threads and I think the respondents are all mixed up on the units of measure. the print reads: Gold Plate (80 mocroinches m
Electronics Forum | Mon Dec 06 15:24:46 EST 1999 | C.K.
I suggest that your customer is living in a land of washable >fluxes and has not kept currect with the vagaries of no-cleans >and your mission is to educate them of: >1 Costs of washing a no-clean and then trying to remove the >white residue >2 Ac
Electronics Forum | Wed Jun 25 08:45:48 EDT 2003 | russ
You may want to try Sensbey, 1-650-697-2032 Ask for Robert Hill. As Dave F. states, We have no relationship nor receive benefit from the company referenced in the above link. Russ
Electronics Forum | Thu Jan 11 17:11:54 EST 2001 | Jeff
To all: I searched SMTnet.com and found that http://www.tesatape.com/ sells SMD splice tape, however, "order numbers" were listed and a Tesa rep didn't know what they meant. Does anybody know how to order SMD splice tape from Tesa? I need part num
Electronics Forum | Thu Dec 09 00:15:55 EST 1999 | Vinesh Gandhi
Thanks for your feedback. I definitely agree with your viewpoints. Can you send across any documents/papers through e-mail or post them on the smtnet which clearly describes the HARMFUL EFFECTS OF WHITE RESIDUES. My customer's only apprehension is
Electronics Forum | Sat Dec 04 02:21:32 EST 1999 | Vinesh Gandhi
Hi All, I am facing a strange problem. One of my esteemed & valued customers has an unusual requirement of cleaning the board with IPA after soldering is complete. I am using alpha metals UP78 no clean sodler paste during reflow. This IPA cleanin
Electronics Forum | Fri Oct 17 09:31:21 EDT 2014 | rgduval
To be honest, I have never had success wave soldering or reflow soldering batteries, regardless of their intended use. If you're going to continue a manual operation to solder one pin, I'd suggest that you just solder the entire component in by ha
Electronics Forum | Fri Oct 17 15:23:28 EDT 2014 | davef
First, don't exceed the maximum temperature of the battery, say 85*C [I don't know your specifics] Second, don't short the terminals of the battery. Third, the best way to wave solder a battery is: * Insert an insulating tab between the battery an
Electronics Forum | Tue Dec 13 21:38:14 EST 2022 | duro
Stephen, there is one CMOS battery on PC board. I haven't check it, but time and date on PC is correct, so I guess it should not be problem. On VME controller is another CR2032 battery (based on VME datasheet it is for some RAM memory). That battery
