Electronics Forum | Sun Jan 04 09:13:53 EST 1998 | Tach Shebby
Whether your buying or selling please take 5 min's to either call fax or visit our web-site. PUT US TO THE TEST !! Ph: 215-542-9821 Fx: 215-542-9824
Electronics Forum | Fri May 17 15:51:32 EDT 2002 | davef
First thing that comes to mind is that your �dip & look� testing at 240�C clearly doesn�t represent the in-use application of 215�C. So, what are the test results at 215�C? Other questions are: * Can we assume that the solderability of other compon
Electronics Forum | Mon Apr 09 20:10:16 EDT 2001 | davef
Automation Group 256-858-3300 BLISS Industries 510-490-8401 EMC 215-340-0650
Electronics Forum | Wed Nov 15 20:34:29 EST 2006 | davef
215. For more, look here: http://www.rohsusa.com/papers/PTV2.pdf
Electronics Forum | Mon May 21 11:18:15 EDT 2007 | davef
=215. Look here: http://www.trafalgar2.com/content/view/1184/106/
Electronics Forum | Thu Dec 06 09:18:12 EST 2018 | ameenullakhan
Hi Betty , Its around. 215 to 220 deg C
Electronics Forum | Thu Sep 21 17:50:43 EDT 2000 | Bill Boles
Does anyone have a quick reminder for a PCB with immersion gold surface finnish going through a reflow profile: Which of the following statements is more correct? A: In order to minimize gold in the intermetallics of the solder joint, the board temp
Electronics Forum | Fri Oct 23 16:16:01 EDT 1998 | Bill Herman
| I am looking for some esd storage containers for tape and reel components in the stockroom. Shelves or bins. Any ideas. | Try contacting Aerofeed Inc. Phone 215-257-1151. Fax to 215-257-1533. They have ESD controlling cabinets for tape and reel c
Electronics Forum | Tue Apr 17 12:58:50 EDT 2007 | Cmiller
This guy has treated us pretty well, the automatic stuff is EXPENSIVE though. Ira S. Schafer, Manix Mfg., Inc. E-mail: sales@manixmfg.com Web Site: http://www.manixmfg.com Address: 1650 Loretta Avenue Feasterville, PA 19053 United States of Americ
Electronics Forum | Tue May 19 12:09:08 EDT 2020 | greezmky
Thank you all that contributed to the troubleshooting! I measured the height of 10+ parts with calipers and found the average to be around 2.15mm. In the program height was set to 2.42mm. I reduced the height to 2.15mm. I have since ran 561 boards