Electronics Forum | Wed Jun 16 13:05:19 EDT 1999 | Clifford Peaslee
Brian, Depending on where you are, the traffic "route" is different. This is what I have: (TRACERT SMTNET.COM) 2 10 ms 10 ms 10 ms 7507port02-atm.maine.rr.com 3 20 ms 90 ms 20 ms sl-gw7-nyc-6-1-0.sprintlink.net 4 20 ms
Electronics Forum | Fri Jun 26 11:15:21 EDT 1998 | David Spilker
I have been asked to evaluate the use of and SOT-23-6. I guess that this part has been around for awhile, but I have never used one. It looks straight forward enough, but I was wondering if anyone out there in forum land has found any special issue
Electronics Forum | Thu Apr 15 20:48:57 EDT 2004 | Ken
Tin antimony mp = 236-240C 80Au / 20SN mp = 280C sn25 Ag10 sb = 365C There are very few high temperature service alloys. how about filling a 1400lb pot with 80% Gold! What is the application?
Electronics Forum | Fri Apr 13 10:57:50 EDT 2007 | bigguy
hi we have an Essemtec FLX 2010 L that has a large board capacity of 600x700mm(23.6x27.5")
Electronics Forum | Mon Apr 09 10:16:14 EDT 2007 | davef
Pick and place: * Fuji: The largest pcb size is 20" by 18" for pick and place; 18"x14" for chip shooters. Fuji NP XL series allows 27 by 23 inch boards using a conveyor. * MYDATA has machines that can be configured to 34" X 44" X 0.500" * HSP 4796A a
Electronics Forum | Fri Dec 22 17:25:00 EST 2000 | Dave F
I'd bet money our operators could use the wrong paste at the wrong time with out the slightest hesitance. This seems to be a fairly novel approach to making things complicated. I will admit I've heard of people talking about doing this, but I must
Electronics Forum | Wed Feb 10 17:00:44 EST 1999 | James Seagle
Does anyone have experience placing a Pinrex 2mm 2x20 SMT header. The dimensions of the part are as follows: length 40mm (1.58"), width 6mm (.236"), height 5.35mm (.211"), pitch 2mm (.079"). If so, what type of centering are you using? Any advice
Electronics Forum | Fri May 26 11:05:15 EDT 2006 | jbrower
Hey Pete. I agree, 250c is a bit on the high side, I'm working with the EM907 paste and getting great results witha top end of 230-236. Best of all, our CEO had a very dificult time telling which board was lead free and which was lead. Have a great
Electronics Forum | Fri Aug 30 10:19:09 EDT 2013 | proceng1
http://i73.photobucket.com/albums/i236/djturnz/IMG_20130830_100237_874-1.jpg It is an IR receiver. Our customer does not know the manufacturer from an old assembly of theirs, but they'd like us to start building them. This is one of the parts we are
Electronics Forum | Fri Dec 22 12:17:02 EST 2000 | vickij
Hi! Has anyone out there ever tried to use a high-temp and a low-temp solder paste on a double-sided board without using an adhesive? (Populate the bottom side with the high temp paste, reflow, turn it over, then run the top side). I looked in the
