Electronics Forum: 24mm (Page 1 of 8)

24mm CP43 Feeders

Electronics Forum | Tue Sep 17 07:42:27 EDT 2002 | cyber_wolf

Hi, We have a serious problem bending our 24mm tape covers. In particular we are feeding a 24mm 16 pitch tape on a 24mm P8 feeder.The component is a plcc28,the tape cover is a AMCD3107 5.0 When the tape covers come in from Fuji the fingers that cove

24mm CP43 Feeders

Electronics Forum | Fri Sep 20 09:07:21 EDT 2002 | cyber_wolf

You are right. It is getting indexed twice. Once by the feed lever and once by the feed cylinder.

24mm CP43 Feeders

Electronics Forum | Fri Sep 20 09:03:32 EDT 2002 | Brad Fruend

This might be totally wrong but if your using a 16 pitch reel in a 8 pitch feeder you are going to have to feed the feeder twice before it will be advanced far enough. This should be in your F4G or MCS30.

24mm CP43 Feeders

Electronics Forum | Fri Sep 20 19:06:09 EDT 2002 | mjabure

The way it works is the first index is done with the feed cylinder, and the final is done using the cam during pick. You might want to check to make sure you're getting a full, complete stroke out of your feed cylinder, also make sure the mechanism

MYDATA FLEX

Electronics Forum | Thu Jul 02 08:27:46 EDT 2015 | sssvajunas

Maybe someone know where company can buy MYDATA FLEX 24mm feeders(only used)? Becouse I found only Flex magazines, 32mm, 44mm feeders but not 24mm.

feeder pitch

Electronics Forum | Mon Feb 14 17:36:37 EST 2005 | griinder

WE ARE USING MIRAE MX240. ON THIS MACHINE, THE FEEDER ADVANCE AND THE FEEDER PITCH IS CONTROLLED BY THE MACHINE/SOFTWARE AS OPPOSED TO THE FEEDER ITSELF. OUR SELECTIONS FOR 24MM FDDERS ARE 4,8,12, 16, AND 24MM.I WAS WONDERING IF THE 20MM PITCH WAS UN

feeder pitch

Electronics Forum | Mon Feb 14 13:25:52 EST 2005 | gregp

EIA-481 standard allows the maximum pitch on tape to be 4mm less than the tape width (12mm width and larger). So it is within the standard allowances. As for how common 20mm pitch on 24mm tape is I can not say. I am surprised a 24mm tape feeder ca

Feeder Counts - How many will I need?

Electronics Forum | Wed Nov 05 20:40:43 EST 2003 | jersbo

Without knowing your requirements... here is a safe bet.. 8mm feeders will typically be your biggest user followed by 12mm then 16mm then 24mm... ect... apples to oranges ? 100 8mm 25 12mm 12 16mm 10 24mm is a close ratio.... as others have stated yo

Please help! looking for cp6 fuji feeder!

Electronics Forum | Tue Aug 24 17:47:50 EDT 2010 | smtmax

I'm looking for CP6 fuji feeder. 16mm x 12mm (KO=8.3mm) 24mm x 20mm (KO=10.9mm) Please help! Thanks!

0.5 mm pitch BGA

Electronics Forum | Wed Mar 02 10:24:48 EST 2005 | Guest

Balls are 0.30 mm diameter, with a height of 0.24 mm It's a 8*8 mm 184 pins BGA.

  1 2 3 4 5 6 7 8 Next

24mm searches for Companies, Equipment, Machines, Suppliers & Information

pcb assembly supplies

Stencil Printing 101 Training Course
2021 IPC Certification Training Schedule

High Speed Precision In-Line SPI System - Mirtec MS-11


ONLINE IPC Training & Certification
SMT feeders

Easily dispense fine pitch components with ±25µm positioning accuracy.