Used SMT Equipment | Pick and Place/Feeders
Device Name: Fuji CP643ME, Fuji CP643ME Mater, Second-hand Fuji CP643 Mater Equipment Profile: The second-hand Fuji CP643 patch machine is roughly 99 years old, with a total of 16 mount heads. Each mount head can be fitted with 6 suction pins at th
Used SMT Equipment | THT Equipment
Cycle Rate Max 25,000 cph (0.14 sec. per insertion) Reliability 200 ppm or better Component Types Capacitors, resistors, diodes, jumper wire, etc. Component Specs Component Class I Distance Between Tapes 52.4mm +/- 1.5mm (2.063” +/- 0.059”) Pit
Used SMT Equipment | Pick and Place/Feeders
The JUKI high-speed placement machine FX-1R is compatible with the linear motor used in high-speed placement and the unique HI-Drive mechanism. It inherits the traditional concept of a modular placement machine and realizes a high-speed placement m
Used SMT Equipment | Chipshooters / Chip Mounters
1 High-speed mounting capacity handling 25, 000CPH(0.14sec/CHIP Equivalent: Optimum condition) +/-50μ M(CHIP), +/-30μ M(QFP)mounting absolute accuracy in full time operation 2 Handles a wide range of components from 0402 chips to W45xL100mm or less
Used SMT Equipment | Pick and Place/Feeders
Features: High-speed placement capability of 25,000CPH (equivalent to 0.14sec/CHIP: best condition) All time, placement absolute accuracy ±50μm (CHIP), ±30μm (QFP) Compatible with a wide range of components from 0402 CHIP～□45
_1.jpg)
Used SMT Equipment | Pick and Place/Feeders
Buy affordable section JUKI FX-1/FX-1R Model number: FX-1/FX-1R Year: 2005-2009 Mounting head: Laser head × 2 (8 nozzles) Station: 80 Board size: M substrate 50*30-330*250MM L substrate 50*30-410*360MM E substrate 50*30-510*460MM Mounting sp
Used SMT Equipment | Soldering - Wave
Vitronics Soltec Delta Wave 6622CC Wave Solder Machine. This item is USED. Item is sold as pictured. Solder Pot contains ~$3k worth of tin lead solder. 2 bottom convection heaters, 1 long wave IR heater. Conveyor has V-groove and L fingers. Spray
Used SMT Equipment | Pick and Place/Feeders
JUKI Mounter fx-1r parameters: Board size: 410*360mm Component height: 6mm 33,000CPH：chip (optimal) / 25,000CPH: chip (IPC 9850) Two independent multi-nozzle laser heads (8 total nozzles) from 0603 （0201） to 20mm square components or 26.5×
Used SMT Equipment | Chipshooters / Chip Mounters
Philips Assembleon Sapphire High Speed Placement Machine, 1998 FES-quick changeover cards (qty 2) Approximately 40 feeders Dual gantry machine capable of placing 25, 000 components per hour (2) - 12 nozzle heads Output: up to 25, 000 CPH
Used SMT Equipment | THT Equipment
CF-9 with reel holder Taped Radial Component Lead Former Production rates up to 25,000 components per hour. Reduce setup time with quick change tooling and repeatable station settings.
.jpg)
