Electronics Forum: 5

Looking for table top wave soldering machine

Electronics Forum | Thu Aug 31 08:37:39 EDT 2006 | nodlac

um why? Technical Devices = 5'8"

J-STD-001 Training

Electronics Forum | Wed Aug 27 13:54:19 EDT 2003 | jdumont

Does anyone know of a company that will come in and do an on site training program for 5-8 operators and give the certificate at the end??

soft gold vs immersion gold

Electronics Forum | Mon Aug 16 18:09:33 EDT 2004 | Kris

ok I agree there has been a confusion with terminology When you say electrolytic soft gold with a minimum thickness of 5-8 of Au, is there a standard that you spec this from ?

Paste sticking to metal blades

Electronics Forum | Wed Nov 01 12:31:38 EST 2006 | jdumont

We also use the Permalex blades with good success. We try to keep around a 5/8" bead on the stencil to help with release.

how to measure Adhesive strength

Electronics Forum | Mon May 11 22:47:45 EDT 2009 | davef

We'd expect that a 0603 in properly cured, in-date code, properly dispensed chip bonder would take 5-8 pounds to push off the board.

Arguments against 1(or 2)-ethoxy-propanol (aka SC01)?

Electronics Forum | Fri Jul 22 09:51:15 EDT 2016 | ttheis

I just wanted to point out that although acetone is GRAS the allowed quantity is certainly not unlimited. In specific categories it is allowed to be between 5-8mg/L.

Require software for Heller 1707EXL

Electronics Forum | Tue Jul 30 03:57:29 EDT 2019 | SMTA-David

Hi, I am looking for software for 2003 model 1707 EXL reflow oven (HC1 controller). I believe latest version for that model is 1.0.6.5.8 (98 Win) or 4.0.2.1 for XP. Thanks

Pre-Used SMT Equipment FS

Electronics Forum | Sun Apr 19 18:58:01 EDT 1998 | Victor Velandia

The following equipment is available immediiately and can be inspected at customers convience: Chip Shooters: Panasert MVIIc, MV150, Mk-1 and MK-2 Screen Printers: Panasonic SPPD, New Long, DEK Reflow Oven: BTU TRS18, TRS 14 (forced convection) Ro

Re: Pre-Used SMT Equipment FS

Electronics Forum | Mon Apr 20 10:16:53 EDT 1998 | J. Hughes

The following equipment is available immediiately and can be inspected at customers convience: Chip Shooters: Panasert MVIIc, MV150, Mk-1 and MK-2 Screen Printers: Panasonic SPPD, New Long, DEK Reflow Oven: BTU TRS18, TRS 14 (forced

BGA solder joint VS. X-Ray machine capability

Electronics Forum | Mon Nov 12 08:42:59 EST 2001 | madreindeer

HI, I would say around 80Kv 5-8um focalspot should be OK. Check systems like CR Technology,Phoenix,FeinFocus these are nice systems. There is low cost system Glenbrook any good I do not know. Good luck, MadReindeer

  1 2 3 4 Next

5,8 searches for Companies, Equipment, Machines, Suppliers & Information