Electronics Forum | Mon Aug 07 20:44:20 EDT 2000 | Dave F
Keith: I'd be surprised if Omega Engineering didn't supply what you need. Checkemaut!!! Good luck. Dave F
Electronics Forum | Tue Aug 08 11:09:15 EDT 2000 | Steve Thomas
Terra Universal is also a decent source for lab stuff, albeit the one I found there (IR transducer type) isn't cheap. www.terrauni.com.
Electronics Forum | Fri Mar 03 12:53:59 EST 2006 | Gary
Try Mini Micro Stencil. They have been doing it longer than anyone out there with the best reputation for quality and turnaound time. Contact David at 760-591-3804. You will not be disapointed.
Electronics Forum | Mon Aug 07 18:00:35 EDT 2000 | Keith
Hi, I'm looking for a kit or design for a high temperature measuring device (thermometer). The necessary feature would include: measures air temp. senses up to 700 degrees c audible alarm max temp memeory setting Any help would be greatly appr
Electronics Forum | Wed Oct 27 13:20:47 EDT 2004 | DavidB
We are producing boards with Alpha 591S RMA No-Clean paste and are coating after SMC with Dow silicone ( toluene solvent based) conformal coating. We have experienced several failures due to soft shorts ( electrochemical migration?) We have also obse
Electronics Forum | Fri Jun 04 12:18:48 EDT 1999 | Gary Miller
| | | Any recommendations for a reballer for BGA and mBGA? Low volume, low cost appreciated! | | | | | Dave: I don't believe that reballing BGAs that go into customer products is a good idea. Check with your BGA supplier to determine their recom
Electronics Forum | Tue Feb 04 22:28:16 EST 2003 | davef
You could reduce the paste by about 70%. Solder balling and tombstoning will be the issues to fight. The drivers to these don't change with the component size. Use the fine SMTnet Archives for background. Aperture Size and Thickness of Solder Pas
Electronics Forum | Wed Feb 22 08:31:42 EST 2006 | davef
Q1 Are there any standard regulating the subject? Very few infos found on IPC. A1 We�re unaware of standards for packing and storage for most types of boards. * IPC 4553 standard for Immersion Silver Finish, 3.8 Packing and Storage. * J-STD-033 and E
| 1 |
