Electronics Forum: 5dx bad solder joint (Page 1 of 23)

bulbous joint

Electronics Forum | Fri Feb 20 08:44:05 EST 2004 | davef

Lucky guess, eh? [Sorry to blow your theory on bad parts] A 1000 of these boards on the line, ummm. Two ideas to consider: * Increase the conveyor angle [don't get carried away, just keep the angle below 8*]. * Balance the flow of solder so that th

Post reflow solder joint inspection

Electronics Forum | Tue Feb 03 06:52:45 EST 2004 | paul_bmc

About 2 years ago our company tried to go with a post reflow AOI inspection. This AOI was suppose to be able to inspect to a level class 3 product. **It is impossible** You cannot inspect for a heel fillet and inspecting for poor wetting is a very

facing cold joint problem

Electronics Forum | Sun Jan 18 10:13:59 EST 2004 | davef

Materials added to solder can change its appearance. For instance: * Gold in tin/lead solder is dull / grainy * Palladium in tin/lead solder is dull / grainy We do NOT advocate using visual appearance to define the appearance of a good and a bad so

BGA open joint

Electronics Forum | Wed Aug 04 20:06:24 EDT 2004 | C.W

Customer returned a brd claim that one of the FPGA is having "cold solder joint". I inspected the the BGA location with X-ray and Ersascope, balls' shape look fine, voids are not detected, perimeter joints show shinny and smooth appearance, i have se

facing cold joint problem

Electronics Forum | Mon Jan 19 14:54:38 EST 2004 | cyber_wolf

How did you come to the conclusion that you are having a cold joint problem. Just by appearance ? As Dave stated if you have any of the metals that he listed in the joints they will appear to be dull and grainy sometimes. But... Dave, I will have t

qfp and soic joint Problem

Electronics Forum | Tue Apr 11 10:30:46 EDT 2000 | Jeremy Smith

I am having a problem with some joints on a 100 pin pqfp and few different soics on one particular board. When viewed a 8x with a "Mantis" inspection scope the joints look as though they wetted to the ic leg but when probed the leg will pop loose.

Aluminum Capacitor disassociated from sodler joint

Electronics Forum | Sun Feb 24 11:16:12 EST 2019 | proy

Guys, I have been down this road also spent a lot of time working on this. Electrolytics often are difficult to solder like this. For the sake of testing, try a water soluble more active flux as an initial test. IF you compare hand solder wetting the

Bad solder joints

Electronics Forum | Sat May 30 09:24:12 EDT 2009 | davef

head in pillow

Wave solder mystery

Electronics Forum | Thu Aug 26 13:09:08 EDT 1999 | Doug

I am building a board with T1/34 LED's in a 10X10 array there are 12 arrays in a panel. The LED's are body to body in the array, .1 spaced. The LEDS have been autoinserted on a Universal RAD III, so they are cut and clinched. The trouble I am having

Re: Wave solder mystery

Electronics Forum | Mon Aug 30 16:14:58 EDT 1999 | Dave F

| I am building a board with T1/34 LED's in a 10X10 array there are 12 arrays in a panel. The LED's are body to body in the array, .1 spaced. The LEDS have been autoinserted on a Universal RAD III, so they are cut and clinched. The trouble I am havin

  1 2 3 4 5 6 7 8 9 10 Next

5dx bad solder joint searches for Companies, Equipment, Machines, Suppliers & Information

Sell Used SMT & Test Equipment

Benchtop Fluid Dispenser
Selective soldering solutions with Jade soldering machine

Reflow Soldering 101 Training Course
Equipment Auction - Eagle Comtronics: Low-Use Electronic Assembly & Machining Facility 2019 Europlacer iineo + Placement Machine  Test & Inspection: Agilent | Tektronix | Mantis Machine Shop: Haas VF3 | Haas SL-20 | Mult. Lathes

Best Reflow Oven
Equipment Auction - Eagle Comtronics: Low-Use Electronic Assembly & Machining Facility 2019 Europlacer iineo + Placement Machine  Test & Inspection: Agilent | Tektronix | Mantis Machine Shop: Haas VF3 | Haas SL-20 | Mult. Lathes

World's Best Reflow Oven Customizable for Unique Applications