Electronics Forum | Tue Nov 24 11:12:14 EST 1998 | Scott B
We are in the process of assessing some medium volume, stand alone SMT Placement systems. Does anyone have any experience with :- 1) Europlacer (Specifically the Progress 6 or EP600) 2) Intelliplace (DHM-120 or SHM-120) I have searched the forum bu
Electronics Forum | Tue Apr 15 15:29:59 EDT 2003 | joeherz
If I did the math correctly, we're talking about over 600 BGAs to rework. I have nothing of relevance to add other than Chrissie should be given a medal for not jumping off a bridge or tall building. Let's save that fate for the operators who didn'
Electronics Forum | Wed Jul 16 06:38:17 EDT 2003 | Wave
We have acquired an UltraPak 600C wave machine and are investigating the possibility of installing a centre support wire conveyor to eliminate the use of pallets. What is involved in this project and how feasible is it? The boards have bottom side SM
Electronics Forum | Wed Oct 29 20:28:59 EST 2003 | davef
The possibilities are dizzying, aren't they? In our dingy fog, if we don't understand your requirement, say so. 3 Spec Fir Tree General Technical Specification 3a Design/Layout: IPC-2221 IPC-2222 3b PCB Fab: IPC-6011 IPC-6012 IP
Electronics Forum | Wed Mar 31 21:02:53 EST 2004 | darburch
If you find your self interested in an electrovert machine we have a UP600 for sale, a good machine if you have experience with electrovert. As for a buying guide I'm not sure if there is a reliable source who has compared the different models.
Electronics Forum | Tue Jun 14 11:25:19 EDT 2005 | pr
Sounds a little tough to achieve. Math isn't my strongsuit but...If you run a million parts through the machine, you will have 200 feeder exhaust's (assuming 5000 per reel). So if you have your machine error out after 3 attempts/misspicks you will ha
Electronics Forum | Thu Dec 15 19:47:43 EST 2005 | Liza
Hi GS, You mentioned that polystyrene should be sealed by low method. We are currently using the ffg parameters for polystyrene monolayer dull finish carrier tape and AA cover tape. Are these considered low by standard? These are the parameters r
Electronics Forum | Tue Jan 31 15:40:44 EST 2006 | mgdrouin1
Comp is relay. I've pulled the spec. Max 240. Using Leister h/g with manual temp settings from 1-6 (20 - 600C)set by the operator. Gun was set to setting 4. They are using the heat gun to reflow the solder after SMT but before wave. High fai
Electronics Forum | Fri Jun 02 03:41:04 EDT 2006 | geb
Found the aramid fabric (Kevlar) on the website you suggested. Which thickness Aramid-and-Fiberglass Sheeting should I get, do I need to buy a strip as well to protect up to 600F? I was going to use PTFE-Coated Fiberglass Thread as it is rated up to
Electronics Forum | Mon Jun 12 18:44:30 EDT 2006 | muse95
OK, Pete, I just looked all through IPC-A-600G. Saw no mention of scoring anywhere. Please provide specific section number info. Thanks By the way, Chris, thank you for the information - that is really interesting stuff. Would you be willing to a