Electronics Forum | Mon Jun 18 10:30:16 EDT 2001 | marys
What determines the cost of X-Ray Inspection?
Electronics Forum | Mon Apr 05 16:48:01 EDT 2004 | Frank Zomber
What type of aluminium tape should be used? I tried one, but it wouldn't stick to the board at reflow temperatures.
Electronics Forum | Fri Mar 12 11:41:53 EST 2004 | pjc
Don't detach the bead and don't twist the wires! The bead should be what makes contact with where you want to measure temperature. Tape is not the ideal method to attached thermocouples for reflow soldering but is OK when using for wave solder prehea
Electronics Forum | Fri Mar 12 11:41:54 EST 2004 | Claude_Couture
The solder bead IS the thermocouple. A thermocouple is two different metal welded together. The junction generates voltage. You can use tape, glue, paper clip, whatever works on your particular situation. Just make sure the thermocouple does not move
Electronics Forum | Mon Mar 29 07:27:49 EST 2004 | pjc
ECD has a product called the Temprobe that is an alternative to hi-temp solder, tapes and glues for thermocouple attachedment. The cool thing about the Temprobe is that you can use it on a pasted board too. http://www.saunderstech.com/
Electronics Forum | Sat May 08 01:42:13 EDT 2004 | smontiel
We have just been audited by our customer. One of the major finding was the thermocouple attachment. They insist that we use conductive epoxy to attach the thermocouple to the IC body and PCB surface. Any suggestion on what brand/model of conducti
Electronics Forum | Sat May 08 08:57:14 EDT 2004 | davef
Your customer doesn't know what he / she is talking about. Read the papers on the links provided by Ren� and Pete C above in this thread.
Electronics Forum | Tue Jan 20 22:28:14 EST 2015 | mac5
Carl, Try this link http://www.smtnet.com/Forums/index.cfm?fuseaction=view_thread&CFApp=1&Thread_ID=6929Message27727 Or search 'thermocouple attach' in the forum Good luck, Mac
Electronics Forum | Thu Mar 11 12:45:40 EST 2004 | Daniele
Hi I have a question about proper installing thermocopule to PCB. I have thermocouple which consist of two wires and they are conected at the end by solder bead. I would like to use adhesive tape to connetct it to the PCB. Should i remove solder bea
Electronics Forum | Wed Mar 24 10:26:51 EST 2004 | mapell
Daniele The other repsonses have it right. The junction of the wires measures the temperature. If your poduct needs to be re-used I would suggest either kapton tape or aluminim tape(the better of the two). If this is your "golden board" I would