Electronics Forum: a20 (Page 1 of 14)

DEK Printers

Electronics Forum | Fri Feb 27 09:53:23 EST 2004 | kauer

Hey, I just got off the phone with DEK. A 20 by 20 stencil will not drop right in, they do make a fixture so you can use a 20 by 20. Call DEK at 908-782-2363 talk to Ron. Later

SMT Terms

Electronics Forum | Fri Nov 01 13:19:16 EST 2002 | soupatech

like this.... D13 Diode, Rctfr, SK12 1A, 20V Schottky "SMB" or F1 Pollyswitch, SMD300, 60V, 3A @20 celcius, "SMD"

feeder pitch

Electronics Forum | Sun Feb 13 14:22:17 EST 2005 | griinder

Has anyone ever ran into a 20mm pitch on a 24mm tape and reel. Our software doesnt have a setting for 20mm. we found a way around it, but i was curious as to how common this pitch is, and if other software or feeders have a 20mm setting.

Pick & place

Electronics Forum | Sun Apr 01 18:16:05 EDT 2007 | colormaker

Thanks for the tip. By Z was to high during alignment. Dropped to 10 on a 20 mill part. Thanks. Jerry

Siemens Nozzle Cleaner

Electronics Forum | Tue Nov 30 08:47:02 EST 2004 | Tarheel

What is anyone using to clean Siemens ceramic nozzles. Siemens recommends a 20% ethanoic solution or a 20% acidic solution but they can't tell me anyone who manufactures this type of cleaning solution. I was using alcohol but was told not to because

Fuji CP 65 Error Code:12037A20

Electronics Forum | Fri Mar 02 14:00:39 EST 2018 | magergar

I have a problem with my fuji machine, it was working and then this error code appear: INTL SRV creation error Error Code:12037A20 and this shows every time on boot and doesn't let me do anything. what should I check?

PBGA overprint

Electronics Forum | Mon Oct 11 15:21:20 EDT 2004 | russ

I have heard of making square apertures for round pads to aid in Xray and possibly allow for better release in some applications. The square aperture in your case would be for Xray inspection and not release. Usually a 20 mil square would be used f

Siemens Nozzle Cleaner

Electronics Forum | Tue Feb 28 21:24:21 EST 2006 | hashim@actsb.com.my

What is anyone using to clean Siemens ceramic > nozzles. Siemens recommends a 20% ethanoic > solution or a 20% acidic solution but they can't > tell me anyone who manufactures this type of > cleaning solution. I was using alcohol but was > told

DEK Printers

Electronics Forum | Fri Feb 27 09:14:40 EST 2004 | cyber_wolf

To simplify; Can I take a 20X20 stencil with a centered image off my shelf and drop it into a DEK printer. OR...Does DEK require a special stencil like Fuji's do ?

DEK Printers

Electronics Forum | Fri Feb 27 12:06:03 EST 2004 | jseagle

A 20 x 20 frame with the image centered will drop in IF you have a printer with adjustable rails for the stencil, the rails move in and out to accomodate 29 x 29 to smaller than 20 x 20. Otherwise, you will need the adapter. James

  1 2 3 4 5 6 7 8 9 10 Next

a20 searches for Companies, Equipment, Machines, Suppliers & Information

Equipment Auction - Eagle Comtronics: Low-Use Electronic Assembly & Machining Facility 2019 Europlacer iineo + Placement Machine  Test & Inspection: Agilent | Tektronix | Mantis Machine Shop: Haas VF3 | Haas SL-20 | Mult. Lathes

Software programs for SMT placement and AOI Inspection machines from CAD or Gerber.
Equipment Auction - Eagle Comtronics: Low-Use Electronic Assembly & Machining Facility 2019 Europlacer iineo + Placement Machine  Test & Inspection: Agilent | Tektronix | Mantis Machine Shop: Haas VF3 | Haas SL-20 | Mult. Lathes

World's Best Reflow Oven Customizable for Unique Applications
Equipment Auction - Eagle Comtronics: Low-Use Electronic Assembly & Machining Facility 2019 Europlacer iineo + Placement Machine  Test & Inspection: Agilent | Tektronix | Mantis Machine Shop: Haas VF3 | Haas SL-20 | Mult. Lathes

High Resolution Fast Speed Industrial Cameras.
Sell Your Used SMT & Test Equipment

Wave Soldering 101 Training Course