Electronics Forum: a60 (Page 1 of 4)

Hazardous material classification question

Electronics Forum | Wed Jul 26 11:10:36 EDT 2006 | slthomas

We're dealing with upcoming (Oct. 2008) requirements for secondary containment of hazardous material that are dependant upon volume. 20 gallons or 200 lbs. (dry). Our washer has a 60 gallon wash sump and a 35 gallon rinse sump. The challeng is how

Looking for an AMP crimping tool

Electronics Forum | Tue Jan 10 10:34:39 EST 2006 | killer1994

I am looking for an amp crimping tool part# 90121 I called Tyco, and checked everywhere else they have a 60 day lead time as it is a made to order part. Was wondering if anyone has any around their shop or other distributors they are awhere of. Thank

45 degree or 60

Electronics Forum | Thu Mar 30 03:45:04 EST 2006 | dd

Hi all, Can anyone explain the main difference between using a 45 degree squeegee angle over a 60. thanks in advance d

Specialty SMT Feeder

Electronics Forum | Tue Mar 16 14:58:23 EST 1999 | Phil

I am in need of feeder that that will feed a 76mm wide tape @ a 60mm pitch to be used on a Universal GSM. It is not a standard tractor feed, so it would require quite a bit of ingenuity. Does anyone out there know of someone who designs and builds cu

Quad Fiducial Types

Electronics Forum | Mon Feb 11 13:07:30 EST 2013 | deanm

You want your machine to spot the fiducials automatically. A 40mil round copper pad is the absolute minimum fiducial to use, but we found in practice that our Quad equipment won't spot them reliably. I am now using a 60mil round fiducial and it picks

Re: Fond Farwell

Electronics Forum | Tue Apr 13 07:41:09 EDT 1999 | Wayne Bracy

Thanks all you kind and knowledgeable folks. I no longer will be participating in this forum. After careful consideration, I have come to the conclusion registration, in the manner required to participate in what was an open forum, is not my

paper vs emboss (& zig zag placement)

Electronics Forum | Sun Dec 09 11:58:34 EST 2012 | ericrr

Is BOC, Beginning Of Cycle? If it is how boring, The real root of the problem is, some of the parts are not put on the correct place, some of the misplaced parts wobble over on the bubble of solder going through the oven, but some been so light st

Zierick

Electronics Forum | Wed May 30 18:05:02 EDT 2007 | fredc

Chunks, Nozzle unfriendly? Maybe it should be called nozzle hostile. Depending on the machine and lighting a nozzle with a 1.8mm tube might work. In English units that would be a .072 OD with a .062 ID. The area such a nozzle would pick from is the 6

Re: Specialty SMT Feeder

Electronics Forum | Tue Mar 16 18:05:52 EST 1999 | Stefan Witte

I am in need of feeder that that will feed a 76mm wide tape @ a 60mm pitch to be used on a Universal GSM. It is not a standard tractor feed, so it would require quite a bit of ingenuity. Does anyone out there know of someone who designs and bui

Re: Specialty SMT Feeder

Electronics Forum | Wed Mar 17 09:39:04 EST 1999 | Mike Evarts

I am in need of feeder that that will feed a 76mm wide tape @ a 60mm pitch to be used on a Universal GSM. It is not a standard tractor feed, so it would require quite a bit of ingenuity. Does anyone out there know of someone who designs and bui

  1 2 3 4 Next

a60 searches for Companies, Equipment, Machines, Suppliers & Information

PCB AOI

Have you found a solution to REDUCE DISPENSE REWORK? Your answer is here.
Fourier Transform Infrared Spectroscopy

Best Reflow Oven
High Throughput Reflow Oven

ONLINE IPC Training & Certification
SMT fluid dispenser

500+ original new CF081CR CN081CR FEEDER in stock