Electronics Forum | Fri Aug 22 13:55:24 EDT 2008 | jdumont
We have used the Cogiscan system successfully here for 3 years or so now I think its been. I couldn't possibly imagine tracking MSL's on a lot of parts by hand... and being able to trust your numbers. This software will track everything for you and a
Electronics Forum | Thu Sep 11 12:53:47 EDT 2008 | chiptargets
Hi, We have recently bought a Genrad Pilot S20 for our analysis lab. The equipment worked before it was sent to us. However, after receiving it, we were able to power up but with multiple error. Since we don't have any experience running the flyi
Electronics Forum | Sun Sep 14 06:37:11 EDT 2008 | johnjohn
Hi All, I am trying to work out the OEE of my NXT equipment to IPC. I am presently trying to work out what metrics I need can anyone help me with this. I think I need the following Machine rating IPC 70% of machine rating, cycle time, What I am tr
Electronics Forum | Tue Sep 16 16:45:44 EDT 2008 | trynders
Thanks for the response! I thought is was odd the component vendor chose SAC for a lead frame finish. I am in the Military world, and things have been difficult to control from a lead-free standpoint. I have not been able to find any studies on SAC
Electronics Forum | Thu Nov 13 20:24:30 EST 2008 | snsmt
Right now, I am mostly getting .pho (gerber files) and .asc (pads) but i don't have anything to convert it to excel or text files so that Cad2cad can read it. I have camtastic! 2000, but i haven't figured out a way to convert it. I want to able to e
Electronics Forum | Wed Nov 19 20:24:15 EST 2008 | davef
There are a number design safety standards for X-ray inspection systems, such as ANS N537 and CFR21. Further, each state will have it's own version of these regulations. We agree with Jerry's post that suggests that your equipment supplier is the b
Electronics Forum | Thu Jan 15 14:16:29 EST 2009 | rgduval
I'd agree. I wouldn't be able to turn significant volume in that short a time span....but, then again, I don't see a lot of people that need significant volumes in that sort of time span. And, agreed on turn-key. I've done a couple of tk jobs in t
Electronics Forum | Fri Jan 16 13:11:27 EST 2009 | evtimov
HI , A LOT OF SIMILAR ISSUES WERE DISCUSSED LATELY. MOST OF THE TIME THE PROBLEM IS IN THE BOARD FINISH. THE BEST OPTION IS GOLD FINISH(ENIG). MAKE A SAMPLE AND TRY IT WITH BOTH PASTES YOU HAVE. ANOTHER THING I DID BEFORE AND IT HELPED ME PARTIALLY
Electronics Forum | Thu Jan 29 16:51:57 EST 2009 | gregoryyork
Hi Small ovens work fine if the settings are correct and I seriously doubt 55cm/min is right. Profile it and speed down to around 35cm/min. Increase first zone to around 170 keep second at 208 but increase last to around 280 BUT profile to check it
Electronics Forum | Fri Feb 13 13:28:12 EST 2009 | ccross
Need some help here. Our RS-1 Rework Station that we purchased with our AOI system crashed. Agilent is no longer supporting this product. We have not been able to recover a driver for the video card or the opto board in the system. These should be *.
