Electronics Forum | Wed Jul 26 11:44:55 EDT 2017 | rgduval
Check with your board house and see if they can do jump-scoring. I haven't dealt with a fab house yet that could, though, so, while it should be do-able, it doesn't appear to be super common, IMO. Alternatively, you could sand the edges after break
Electronics Forum | Thu Aug 24 00:05:14 EDT 2017 | heros_electronics
The first reply from Tsvetan Usunov already > answered your question - there are no thermals > for one side of the chips. > > You can try to > reduce the phenomenon by using different solder > pastes, tuning your soldering profile or even > swi
Electronics Forum | Fri Sep 15 04:09:15 EDT 2017 | philc
Yageo announced their decision to stop marking SMD resistors back in 2013, and since then we have started to see 0603's that aren't marked, but larger sizes - so far - are still showing a value. 0402's have never been marked, and I doubt they ever w
Electronics Forum | Tue Oct 03 15:55:12 EDT 2017 | action_101
My company pays for me to get certified to be an in house IPC trainer and I receive a certificate that says I am certified for two years, but IPC says halfway through the two years that I need to take another course to be able to hold an official cla
Electronics Forum | Wed Nov 01 11:51:13 EDT 2017 | spoiltforchoice
I don't think you will find any of that out there and freely available. As I recall MyData was one of those manufacturers who insist you do their training at their facility which limits the ability for the material to escape into the wild. I would su
Electronics Forum | Thu Nov 30 00:41:23 EST 2017 | abhilash4788
Dear All, I have OSP finsh pcb on my production, the pcb thickness is 1.5mm and the product is one sideded pcba. After reflow process, Is there any specific time frame defined for smt completed OSP finish pcba before going for wave soldering proce
Electronics Forum | Wed Dec 06 09:09:54 EST 2017 | davef
Suppliers have improved the utility and quality of OSP [organic solderability preservative] solderable surface protection over the years. Be cautious reading too much into older SMTnet [and web in general] conversations about handling OSP. When prop
Electronics Forum | Tue Jan 09 14:41:55 EST 2018 | bsyeo
Hi All, Need some help on this. We have a strange problem with our Dek API. There is no camera vision but everything is able to initialize well. The vision works occassionally but most of the time it does not. We have checked the nextmove card, int
Electronics Forum | Thu Jan 18 09:31:47 EST 2018 | Robl
Hi All, Has anyone had any luck with gang picking the same part on Juki 2060 or FX1R's? Example: 100nf 0402, we can pick this part simultaneously from 8 feeders at once on our Yamaha's (or 12 on the old Sapphires), but on the Juki's we don't seem t
Electronics Forum | Mon Feb 26 08:58:01 EST 2018 | altus_group
Hi Wnb_Pemgr, I am not sure where your facility is based but I was hoping that we might be able to help with some of your issues? Hopefully we can support you with any ongoing problems you have or escalate any cases you have already made with Koh Yo