Electronics Forum | Thu Jun 22 10:22:28 EDT 2006 | PWH
I've done this stuff on UP3000's and AP's so hopefully my advice will help with your 2000... You can get into all upper level user modes, correct? You don't mention test, cal. or field service mode. If you can't get into those, I can send you a pr
Electronics Forum | Wed Feb 21 06:11:41 EST 2007 | CL
Good Morning, We have 5 Mydata MY machines in separate lines. We are placing 0201's, uBGA's, CSP's, etc.... I cant say that we have never had accuracy problems but whatever caused the problems was identified and they are fairly accurate as far as I'
Electronics Forum | Mon Aug 28 17:04:52 EDT 2006 | Board House
ImSn - Immersion Tin - Not Recomended- short shelf life ImAg - Immersion Silver - Prefered Surface finsh by most Board houses, Best reworkablility, 12 moth self life, ENIG - Electroless Nickel Immersion Gold - Second Choice for Board Shops, 12 -
Electronics Forum | Thu Sep 21 20:37:21 EDT 2006 | basem
Does anyone on this forum has experience with any of i-PULSE SMD placement systems? I am looking at the M4e. Also, can someone advise me on what to choose if the desired final circuit is of very high density and small pitch (0.5mm)? I am considerin
Electronics Forum | Fri Sep 22 11:52:47 EDT 2006 | basem
Then Fuji it is. I'm happy with the features the Juki's R seriers are giving out. It is like, everything I could think of a placement machine if I would design one for myself...the 2060R is something I would buy happily...especially after you telling
Electronics Forum | Fri Nov 03 11:36:34 EST 2006 | mika
Hi, It is good news to "hear" that You found the problem. This control board has also broken for us once but we had a broken camera unit from where we took this board as a replacement. Unfortunately I was not able to find the circuit diagram (among a
Electronics Forum | Thu Nov 30 16:10:05 EST 2006 | Hussman
Wow, why all the anger? This gap you guys are talking about is measured as "G" in IPC/EIA J-STD-001 (Chunks was there, but she failed to read the fine print). And almost all parts that measure G follow Note 3 which states "Properly wetted fillet s
Electronics Forum | Mon Dec 11 05:30:11 EST 2006 | mika
[Drop down menus] > Machine > Configuration > Parameters > Axes => You are now on a page with 3 menus > on the left side menu [Axis choice] scroll down and mark [Transfer belts] > On the upper right menu [Configurable Values] > mark [Default maximum
Electronics Forum | Fri Dec 15 07:25:21 EST 2006 | kvanzill
Hello, I am seeing something new to me and I am hoping some one some where may have resolved this before. I am running a Panasonic SPF63 screen printer with Tamura (RMA-012-FPL) solder paste. Now this problem is hard to describe but I will do my bes
Electronics Forum | Thu Jan 04 17:04:43 EST 2007 | slthomas
99% good solder joints = 10000 ppm (defects per million opportunities). Having only built with 0603s I can't speak for a target but that still seems pretty harsh....with a 75/25 0805/0603 ratio at my last place of employment I think we were running