Electronics Forum | Thu Apr 30 16:00:50 EDT 2009 | joeherz
Fids ON the PCB will have a reference to the PCB 0,0 point in CAD data generally or can be measured with good accuracy in gerber if CAD is not available. Panel fiducials are not always referenced from the PCB 0,0 point but many times are referenced
Electronics Forum | Thu May 14 10:50:14 EDT 2009 | dnachristen
Hello, New to the site here. Have a few questions regarding Philips (Assembleon) Equipment and program transfer. We need the ability to transfer "Golden Programs" to and from the machines. I'm currently using AMS 2.0 with line control. I hooked up
Electronics Forum | Wed Jul 08 14:13:51 EDT 2009 | stepheniii
Actually that reminds me I remember one place I visited that wore two heel straps for saftey purposes. The reasoning was that if you touched a live wire with one hand and only had the heel strap on the other foot the current would go through your he
Electronics Forum | Thu Aug 20 13:59:42 EDT 2009 | dcell_1t
Hi there! After various trial-error experiments we determined that two factors are the most insignificant in order to reduce or make worst the issue, those factors are: Placement force: regular placement vs "force applied" to dip the component on th
Electronics Forum | Tue Oct 27 15:53:23 EDT 2009 | smtspecialist
Sr.Tech is absolutely right !!! This is where I had started, by changing all 4 brushes on the motor then I changed the connector since it was turning black (Mydata have a retrofit connector assy for that!, you can do your own also!) After trying thos
Electronics Forum | Fri Mar 26 11:50:47 EDT 2010 | rway
The programming time depends on the system you are using. I use YesTech. It has been a reliable system for catching the majority of production issues. The programming time on this system is around 20-30 min. with a full library, meaning you don't
Electronics Forum | Mon Apr 19 15:45:21 EDT 2010 | dwonch
Thanks to all for your input. We did have a third party do an analysis on boards from the first shop. They were shipped directly from the board shop to eliminate the possibility that we could contaminate them. The third party (Forsite) did find Sili
Electronics Forum | Mon Jun 14 14:09:23 EDT 2010 | jmedernach
Chris, There are a lot of potential causes for voids. I'll list a few below: a.) cleanliness (or lack there of) b.) Via in pad where said vias are not filled c.) reflow profile design d.) incompatible materials My knee jerk reaction would be to che
Electronics Forum | Mon Aug 16 13:38:35 EDT 2010 | rl
i would like to request some advice on manually dispensing paste for super fine pitch components. first some background. i am a small design house and specialize in sub-miniature prototypes for avionics. so far, i have mostly used stainless steel st
Electronics Forum | Thu Sep 16 18:43:57 EDT 2010 | slwolbert
Hello Daxman, Thanks for the input. Yes, the CP2 is closely related to the CP4 and does have the analog servo amps as you deduced. I did a wiggle test on the connectors and found that the x-y-r servo amp alarmed right away and blinked the x axis a
