Electronics Forum | Tue Jun 29 22:56:04 EDT 2010 | deanm
There may be a better way, but this is how we do it: We have one SMT line and ALL SMT parts are kept in the SMT area. There is no kitting of SMT parts...only through hole, etc. For each SMT part in our ERP system, we set for backflush. That means th
Electronics Forum | Fri Nov 04 01:24:53 EDT 2011 | kevintough
From what I have seen of the Omron software your most interesting challenge and prerequisite for a clean and complete inspection is a full understanding of the color triangle and it's settings. I know you can find almost the same interface/GUI in the
Electronics Forum | Fri Aug 20 19:01:26 EDT 2010 | varivenca
VARIVEN,C.A, is a newly emerging company in the electronics field. Variven was established in 2009 to take care of design, repair and maintainance of pcb cards and electronic machinery for oil companies. As of now we are creating basic boards for o
Electronics Forum | Thu Sep 16 18:43:57 EDT 2010 | slwolbert
Hello Daxman, Thanks for the input. Yes, the CP2 is closely related to the CP4 and does have the analog servo amps as you deduced. I did a wiggle test on the connectors and found that the x-y-r servo amp alarmed right away and blinked the x axis a
Electronics Forum | Tue Oct 05 16:38:51 EDT 2010 | tskim83
Our hole inspector gives this error message “Base Hole Error”. It is a flat conveyor-type hole inspection machine from YAYATech that scans PCBs, with an optic sensor and cameras on top of the belt and a light source on the bottom of the belt. And dur
Electronics Forum | Thu Jan 13 10:40:38 EST 2011 | tony_d
Good Day Michelle, If you are looking for a solid AOI system that is simple to program and extremely accurate my recommendation is MIRTEC by far. We checked out several machines and narrowed the selection down to two, YESTech and MIRTEC. We had an
Electronics Forum | Tue Dec 07 10:47:09 EST 2010 | walkbury
As a high mix, low volume CEM who deal with a lot of free-issued kits, we are heavily reliant on foil (tape cover) extenders. We don't usually bother with splicing as our machine feeders (Simenes Siplace and Samsung SM321) are designed in such a way
Electronics Forum | Mon Jan 10 17:12:53 EST 2011 | gosswald
I have been researching older lower cost used Pick and Place machines and so far I am leaning towards the Quad IV C. There seems to be a fair amount of these units around and I have heard some pretty good things about them on some of the past posts.
Electronics Forum | Mon Jan 31 09:31:31 EST 2011 | dwonch
Hi all, We've had a Yestech F1 system for several years now. Overall we are happy with the machine, fast and easy to program. Good false call rate and few misses. Now for the issues. We have two in particular. 1. Software crashes - these general
Electronics Forum | Thu Feb 10 18:18:45 EST 2011 | Anthony
I'm in the market for a low volume oven and so far I'm pretty disheartened with the availability of low volume ovens at a good price. It seems like the only high quality and reliable ovens are $3500+, which is basically out of my price range. I've