Electronics Forum | Mon Jan 28 13:13:19 EST 2013 | chifutbol
I am just being introduced to GemLine and Assembleon. I have been trying to get the programs on two other computers so we get more work done. One is windows 7, the other is vista. I was unable to get PCP explorer or editor installed on the windows
Electronics Forum | Tue Feb 12 16:24:21 EST 2013 | larrygroves
Dave, It depends on what you mean by swapping heads. If you want to move the aligners its not too hard. If you want to move the entire head assy it will require a lot of calibration. Anything can be done but it really about the cost and the value
Electronics Forum | Tue Feb 12 16:14:59 EST 2013 | larrygroves
Jonnie, I think the entry level machines from all the major manufacturers are capable of 0201 and 01005 placements when properly configured. Keep in mind that as you go to smaller parts the process window gets tighter. Printing is a major concern
Electronics Forum | Mon Feb 11 09:49:43 EST 2013 | marcelorotofrance
Well, i can divide the inaccuracy in two phenomenons: Poor repeatability, i.e. the pockets don't stop at the same position after every shot by a margin of up to 0,5mm (20mils). The second problem is the stop pocket position, which is not equal from o
Electronics Forum | Fri Feb 15 05:36:07 EST 2013 | adrianus
Hi Dave, We do not reflow those parts but are merely a supplier. Therefore I need to have our application specs in order. So, in case the customer has a problem I want to be able to properly support the customer. Hence, I'm curious about the details
Electronics Forum | Fri Mar 08 16:30:53 EST 2013 | pctech
We have 1880 Heller about 12 years old and running like a charm everyday. I doubt that lead or non-lead operations will have anything to do with it. Do you use high temperature lubricant on edge hold chain and rail periodically? This may help to ease
Electronics Forum | Tue Apr 30 21:35:36 EDT 2013 | cpcompany
Fraud, Danny Finally you shut down your phone and ran away because I am flying to Singapore. I will find you and put you in prision. You shall not put your feet in this business anymore. I will watch you wherever you go and stop you doing fraud! Ev
Electronics Forum | Fri Mar 08 04:27:03 EST 2013 | grahamcooper22
Homemade cabinet may sound like a simple solution but you need to think about making sure the RH is always less then 5% and everything must be ESD safe....ESD is more of an issue at LOW RH levels...so the glass / plastic in any door needs ESD coating
Electronics Forum | Wed Apr 03 10:25:04 EDT 2013 | gregp
We all seem to have forgotten about cover tape peel force testers. GPD makes them as do others I suppose. I would ask the tape and reel house if they have a tester. If they don't I would consider using someone else. Otherwise as another poster s
Electronics Forum | Fri Mar 15 08:25:42 EDT 2013 | torch
looking for a bit of advice really, our current reflow oven (surfair 510) is in the process of slowly dieing so we are in the market for a replacement. I havent followed technologies on ovens for a while but im looking for something that is low to m
.gif)
