Electronics Forum | Mon Oct 01 09:42:42 EDT 2001 | ac
Darren , I done the HNC in Electrical & Electronic Engineering which was later changed to Mechatronics . The course itself will give you a good broad based grounding in all aspects of E&E Engineering . What you really need to back it up is good quali
Electronics Forum | Thu May 26 21:25:05 EDT 2005 | thaqalain
The approximate AC working voltage of a capicitor,comapred with it's DC rating is=
Electronics Forum | Wed Feb 24 14:59:43 EST 2021 | ilavu
Tom, Go with AC-30 for LEDs. Stay away from Flexjet heads (AC72).
Electronics Forum | Fri Jan 05 12:02:28 EST 2018 | ilavu
Camera works fine from home to ref. position to fiducial1 and 2. Problem shows up from home to board stop. AC voltage between AC1 and AC2 is 41.7 and during move it drops to 41.5.
Electronics Forum | Thu Jun 09 17:12:43 EDT 2005 | thaqalain
Capacitor working voltage One very important rating of capacitors is "working voltage". This is the maximum voltage at which the capacitor operates without leaking excessively or arcing through. This working voltage is expressed in terms of DC but th
Electronics Forum | Thu Jun 09 19:50:29 EDT 2005 | gb
If you can put an AC voltage through the capacitor it will say its rating on the datasheet. (Wouldn't recommend trying AC on an electrolytic one though!) Here's one to try http://www.farnell.com/datasheets/51176.pdf page 2. http://www.electronics
Electronics Forum | Thu Nov 24 20:53:58 EST 2005 | adlsmt
Sorry, the AC-30 is the "Lightning Head" machine and the AC-72 is the flex placer. The price is correct. Was in a hurry to get home on Friday and reversed them in the sentence after the price.
Electronics Forum | Wed Sep 02 16:41:44 EDT 2009 | pcbcleaning
Advanced Cleaning Solutions is a Johnstown, PA based electronic manufacturing service provider (EMS) with more than 3,500 square feet of ESD safe facilities. Our services include precision PCB cleaning and ionic cleanliness testing/verification usin
Electronics Forum | Fri Aug 02 13:49:03 EDT 2013 | jaimebc
Suspecting a short on the AC chassis, suspecting a short on T2. Thanks in advance for your input.
Electronics Forum | Tue Sep 01 11:12:18 EDT 2015 | zombee
Problem is solved! There wasn't voltage on motor inputs (only 5-10V AC) when the motor connected correctly, but was ~210V AC without motor. Firstly, I exchanged the motor speed control relay (Panasonic G-series type), but the result was same. (the a
