Electronics Forum | Fri Oct 22 11:34:13 EDT 2010 | clampron
We have ACE and really like it. It's been a > great machine. We also have an ACE KISS 104. Great machine. Awesome support! Good Luck Chris
Electronics Forum | Tue Jul 01 09:57:30 EDT 2008 | grayman
I do not know if you want selective wave soldering or selective point soldering? If you have good budget say, less than US$200k Vitronics is best for wave selective soldering. However, if you have low budget say less than US$100K I suggest ACE or K
Electronics Forum | Fri Dec 19 13:13:53 EST 2008 | evtimov
Dyoungquist, As I know RPS is doing that equipment from a long time and ACE is actually formed by x employees from RTS. KISS 104 looks exactly the same as RPS Rythm. :) The point is that if you want to use wave soldering machine, adhesive will be
Electronics Forum | Thu Jun 21 16:30:47 EDT 2012 | grauen06
We are currently using an ACE K.I.S.S. 104. We used SN100 solder with AIM NC265 flux (no clean, alcohol-based). Also, we use topside preheat at 100 degrees C and a 6mm nozzle (as big as we can go with this application). The PCB has a matte finish as
Electronics Forum | Tue Nov 20 15:06:34 EST 2007 | solder_master
I looked at the Kiss104 and the SPA-400 at the SMTA show in Orlando. I spent an hour with the ACE rep, and walked away totally confused as to how the machine is programmed. I spent 10 minutes with the rep from APS Novastar, and using their Photoscan
Electronics Forum | Thu Dec 29 14:17:08 EST 2016 | westshoredesign
If you are in US, contact Dave at ACE. Their tech support is excellent.
Electronics Forum | Thu Dec 29 18:10:18 EST 2016 | sarason
mount you are off would seem a little large for a mis-calibration! sarason
Electronics Forum | Fri Mar 22 14:07:00 EDT 2019 | proceng1
I believe that NORDSON now recommends AIM NC277. Nordson bought out ACE-protech.
Electronics Forum | Wed Feb 13 13:30:03 EST 2019 | emeto
I personally prefer a NC process if I have to chose. AIM flux was good NC377 I think(they keep changing names), NF 372 from and many more. You can make them all work...the KISS 104 ...
Electronics Forum | Thu Feb 07 12:50:21 EST 2019 | gregcr
Hi All, What are you running for selective solder flux? I'd like any opinion on water soluble and/or no-clean fluxes you are using. In our Kiss 104 machine we use HYDRO-X20 water soluble flux, per the original install suggestion, but I'd like to k