Electronics Forum | Mon May 22 23:29:11 EDT 2006 | fordf1502004
I am currently using a sanyo V850 machine. We are haveing problems with the upline and downline communication from the sanyo to any other conveyor. The conveyors we have on hand all use smemma, and the sanyo has an adapter box that connects to the sm
Electronics Forum | Sat Sep 19 16:15:27 EDT 2009 | sskeels
I am looking for a forum to ask for leads (other forums or manufacturers) who might provide what are called IC Adapters or Carriers which allow the use of an IC with a changed footprint (land pattern or pin-out) to be used on a previous PCB which has
Electronics Forum | Sat Aug 01 03:52:54 EDT 2015 | mikekeens
I have had some custom support jigs made but as i'm working for a contract electronics manufacturer there are so many different PCB assemblies to be made - storage of the different jigs and the changeover time is the problem. The support system ne
Electronics Forum | Thu Aug 13 14:43:23 EDT 2015 | alphatronique
HI i try to figure how the "Manual load adapter" work on a T3 Table machine ? seem that the table always try to move the board to the the left sensor location ,but if i use the magnet manual table it will never find the board on the table convey
Electronics Forum | Tue Jul 02 10:34:48 EDT 2019 | dman97
You should be using the diagram on page 4. 9pin to 25 pin. Flexa settings should be set to NT C/C. You have to make sure that the COM settings in windows are set correctly for the USB adapter you are using. Whatever COM port windows assigns to the US
Electronics Forum | Fri Oct 23 05:02:34 EDT 2020 | gabriel1blue
I change the settings to match another machine we have and that actually got the original drives working after replacing the belt. I ordered an adapter that will connect to the 26 pin flat cable and adapt to a 34 pin connector and pull the power from
Electronics Forum | Wed Jul 14 13:10:49 EDT 1999 | Earl Moon
| I am trying to solder a 388 ball BGA to an Andon Electronics Corp. BGA socket adapter and I am having problems in the reflow of this part. I put no clean paste flux in the solder cups of the adapter then put the BGA part onto the adapter and run it
Electronics Forum | Thu Jul 15 08:03:36 EDT 1999 | Mark Quealy
| | I am trying to solder a 388 ball BGA to an Andon Electronics Corp. BGA socket adapter and I am having problems in the reflow of this part. I put no clean paste flux in the solder cups of the adapter then put the BGA part onto the adapter and run
Electronics Forum | Wed Dec 23 22:00:50 EST 1998 | Phillip Hunter
| Many machines now have adaptive pick that helps tune in the pickup as the 0402 part moves around in the pocket. Fuji may have a feature like this, but I think they adapt the pickup in only one axis (by adjusting the feeder rack). Unfortunately th
Electronics Forum | Thu Dec 24 15:17:12 EST 1998 | Jim Mitchell
Phil - The C Series machines do not support adaptive pick. If you get a chance, take a look at the the Q Series product line from Quad. I think that you will be impressed. I worked with L&W for a number of years. There has been a great relationsh