Electronics Forum | Tue Sep 06 09:59:32 EDT 2005 | slthomas
Find out if you can separate the dehumidifier controls from the heating/cooling controls, without adding an air handler. Otherwise I think you'd need to add a dehumidifier that runs independantly. Don't forget that system capacity has to be rated fo
Electronics Forum | Fri Oct 14 15:44:30 EDT 2005 | fastek
Yes....interesting. Word is this better be successful for them or they are done. At first glance my issue would be what impact do solder paste "dots" have in the following areas compared to stenciled paste: 1) Controllable with regards to volume 2
Electronics Forum | Tue Nov 01 01:36:27 EST 2005 | mki
Hi, I am looking for opinion about possibility to do BGA rework with SRT-FPD? This early model (before 2000) is equiped with "Variable Perimeter Heater" (VPH). For BGA rework, SRT introduced later "Summit" models with removable nozzles. I am wonderin
Electronics Forum | Fri Dec 16 01:36:53 EST 2005 | tk380514
i would assume when the PCB planner and customer would specify what "surface layer type"they want but this section is always empty but i have found that out yesterday that we only use ENIG and not FLASH GOLD, which is good to know........ but it see
Electronics Forum | Thu Dec 29 05:56:37 EST 2005 | bobpan
Dont quote me on this because its been a while but i believe thats a grounding issue on the quad-align card itself. The card is located in the rear right bottom of the machine. Try adding a ground wire to the cage that the card is mounted inside. Als
Electronics Forum | Fri Feb 17 16:46:29 EST 2006 | GS
Hi CW, mine is not the answer to your questions, but I suggest you to take a look of the latest level of J-STD-033B (October 2005) The J-STD-033A was from July-2002, and several important points are different from latest level. For instance, in Cha
Electronics Forum | Fri Feb 17 16:50:58 EST 2006 | GS
Hi CW, mine is not the answer to your questions, but I suggest you to take a look of the latest level of J-STD-033B (October 2005) The J-STD-033A was from July-2002, and several important points are different from latest level.For instance, J-
Electronics Forum | Fri Mar 24 09:10:41 EST 2006 | samir
I heard something interesting yesterday on American satellite radio news. Reebok has been making little Pb (WML, Pb is the chemical symbol for Lead) "ad-ons" to their children's shoes causing kids to swallow these things and die from Lead-Poisoning:
Electronics Forum | Tue Mar 28 13:29:45 EST 2006 | solderiron
SN100C, not as aggressive towards other metals as are other High tin lead free alloys. Why? Sn63/pb37 The lead prevented the tin from being very aggressive. SAC305 no lead, silver instead. Silver doesnt block Tin from it's aggresiveness. SN100C no si
Electronics Forum | Sat Mar 25 07:43:20 EST 2006 | smartasp
Hi You all We use no clean flux in our lead free wave soldering process and have unacceptable residues. The provile is spot on. If I reduce the flux amount the holes won't be filled and border on the IPC II specs. The customer does not accept partia
