Electronics Forum: adhesive+ (Page 1 of 141)

Thermal Conductive Adhesive Sheets (AUTO PLACEMENT PROCESS)

Electronics Forum | Tue Mar 19 08:18:36 EDT 2019 | sujay

ParsonAdhesive is one of the best constructors of a spacious range of high-grade anaerobic adhesives for a variety of Industrial Adhesives applications. ParsonAdhesive are provide these anaerobic adhesives and Industrial Adhesive to a spacious varie

Conductive Adhesive and UV cure adhesives dispensing

Electronics Forum | Fri Feb 21 02:00:53 EST 2003 | successmani

Hi, I would like to know how Conductive adhesives and UV cure adhesives are dispensed. I know that nonconductive adhesives are dispensed through jetter, Auguer pump annd other contact type method. I am puzzled and curious to know whether there is any

Adhesive dispension

Electronics Forum | Mon Mar 01 13:29:43 EST 1999 | dszeto

We have customer requested machine dispension on adhesive of solder side components, however we are currently using stencil printing for adhesive. Have anyone evaluated and compared on dispension and screen printing of adhesive before? Thanks!

Adhesive Printing

Electronics Forum | Tue Mar 12 14:26:51 EST 2002 | cbarnett

Currently I am dispensing adhesive and would like to screen adhesive. Just need to know if anyone has had any luck with this process. If so what adhesive are you using and what are your printer parameters?

oven resin from adhesives

Electronics Forum | Mon Aug 19 04:48:27 EDT 2002 | surachai

I'm not found this problem with adhesive but found in NC flux , Then you should get some residue and analyse it by SEM and EDX for specify the actual source ( flux or adhesive ? ) , if it 's from adhesive , sometime your supplier must join this pro

SMT adhesive suggestions?

Electronics Forum | Fri Jul 20 08:26:52 EDT 2007 | cyber_wolf

SMT adhesive is hydroscopic. Some types absorb moisture faster than others. Moisture+SMT adhesive= pourous adhesive after cure. Excessive cure ramp rates can also contribute to porosity.

Epoxy on bottom of SMT component

Electronics Forum | Tue Nov 27 14:56:33 EST 2007 | jaimebc

Shy, What is your current method of applying adhesive? If the terminals of the component that has adhesive are not wetting ( or not forming a solder joint I think we are talking about ) after reflow, then you must be applying too much adhesive. As

Re: Adhesive dispension

Electronics Forum | Sun Jun 04 14:14:24 EDT 2000 | James.L

1) Adhesive dispensing -number of dot per component , what's the determined factor ? What's the distribution ? 2) What is the critical factor to monitor the consistacy of volume & profile per dot ? 3) What is the effect of temperature/balance of adhe

Re: Adhesive strength specs

Electronics Forum | Wed Dec 10 14:37:47 EST 1997 | Frank Murch

There is a direct relationship between adhesive strength and surface area. If you graph this it will be linear. The amount of the adhesive should be about 2/3 the gap between the pads. Pad designs change all over so a true and tried rule does not ex

Re: Adhesive Stencils

Electronics Forum | Thu Jul 13 11:38:34 EDT 2000 | DEK

If you want some information look at the DEK website http://www.dek.com/adhesives/

  1 2 3 4 5 6 7 8 9 10 Next

adhesive+ searches for Companies, Equipment, Machines, Suppliers & Information