Electronics Forum | Mon Jan 10 08:56:19 EST 2005 | John
Does anyone know whether it's possible, given a copy of OS/2 Warp 4, and the Universal software, to set up a standalone box, not connected to the machine itself, in order to do programming, etc, faster? I've got the feeling it is, but I'd hate to in
Electronics Forum | Tue Jan 11 14:16:31 EST 2005 | jdumont
Thanks for the suggestions...The unit was just cleaned last week and all the sludge was removed so that shouldnt be it. As for the concentration, im not sure. The only water that has gone into the evap is the rinse water. So im not sure if that could
Electronics Forum | Sat Jan 29 04:11:45 EST 2005 | jedduan
Hello my friends, Has anyone used AT2000CR reflow oven?For the harddisk of one reflow oven(AT2000CR) in my company broke down.I want to get its operation software(DOS version).Could anybody give me a hand? My email:duanjt@trim.com.cn Thanks in adva
Electronics Forum | Mon Feb 14 17:36:37 EST 2005 | griinder
WE ARE USING MIRAE MX240. ON THIS MACHINE, THE FEEDER ADVANCE AND THE FEEDER PITCH IS CONTROLLED BY THE MACHINE/SOFTWARE AS OPPOSED TO THE FEEDER ITSELF. OUR SELECTIONS FOR 24MM FDDERS ARE 4,8,12, 16, AND 24MM.I WAS WONDERING IF THE 20MM PITCH WAS UN
Electronics Forum | Wed Feb 23 17:23:36 EST 2005 | Brent Robinson
Another this to check is the feeder itself and packaging. The feeders have a little shutter covering the part when the feeder advances. We have noticed a static charge build up in that, or the parts, causing the part to pull out of the pocket when
Electronics Forum | Wed Mar 30 01:01:10 EST 2005 | vicknesh28
All, Has there been any finding from the component point of view in terms of non wets after reflow and if yes, can anyone share what was improved on the component to reduce the non wet defective levels. What would be the contribution from the compon
Electronics Forum | Wed Feb 23 11:41:53 EST 2005 | GS
Hello, a - does any one of you have experience with PCB finished by SN100C (SnCuNi)? SMT single side? SMT double side? SS/DS plus PTH? b - if yes, what about compatibility with different alloys (ie. SAC)used for SMT or Wave (different me
Electronics Forum | Fri Mar 04 11:30:46 EST 2005 | Steve
Is anybody using via-in-pad under a BGA successfully? Is this a specialized capability, or do most board houses have the capability to do micro-via's? How small does the via need to be in order to avoid solder wicking? I understand that in order for
Electronics Forum | Sun Mar 06 11:04:19 EST 2005 | jsk
Slot three will not recognize magazine. LED's are lit (green)when inserted into slot three. Magazine works in all other slots. Tried multiple magazines. All gave the same error. Error code = E-MIPR-1 unknown magazine type slot 3 No visible damage t
Electronics Forum | Fri Mar 11 11:10:59 EST 2005 | AshleyN
We are currently masking and dipping. I need to source a selective conformal coating machine. I'm looking for something that's easy to program, accurate, good running costs and all that good stuff, semi-automatic, and repeatable for operators to use
.gif)
