Industry Directory | Manufacturer
Arrowhead Alarm Products was Established in 1986 with a philosophy to provide top quality security equipment with an emphasis on expert back up, free training and support.
New Equipment | Assembly Services
SMT board loading machine parameters It has the advantages of simple operation, reliable structure, excellent material selection and high quality. Product specification: weight: 65kg Power supply voltage: single 220 V (or 110 V) Power: ≤ 50W
Type no. K-MA8835 Heating parameters Number of heating zones On 8 August Length of heating zone 2850mm Heating mode Hot air Number of cooling zones 1 Send some parameters
Electronics Forum | Fri Aug 19 08:32:54 EDT 2022 | angela t
The GKG G5 press has occasional drive alarms, sometimes it turns off and restarts, sometimes it needs to be unplugged from the board cable at the back and the alarm returns after a period of production. What is the problem? Could any of you give me a
Electronics Forum | Fri Aug 26 01:46:04 EDT 2022 | angela t
The drive and power supply were checked and were fine, but later I found that there was a problem with the J22 cable, which would alarm if I touched it. I suspected that the cable was damaged and planned to buy a replacement cable to try.
Used SMT Equipment | Board Cleaners
• Vintage 2008 • PLC based Control System • 480V AC 60Hz • Auto Stop/Stand by Mode • Final Rinse low flow sensor and alarm • Mach II Drying System • 2 upper, 2 lower jet manifolds • 15 HP blower upgrade • 18” Off Load Extension • Integrated
Used SMT Equipment | Soldering - Wave
Operating System: Windows based Details: • Dual pot-Lead and Lead Free • Includes full pot of Lead Free –SN100C solder and Lead SN63/PB37 solder • Carbon Steel Solder pots with high temperature protective coating • A
Industry News | 2003-03-28 08:46:12.0
The high scan speeds and fast setup times of the Excalibur system make it a good choice for this sector of the bare-board PCB manufacturing industry
Industry News | 2022-05-18 12:28:49.0
The electronics manufacturing industry is welcoming a new, bipartisan proposal in the U.S. Congress that would help bring back the country's printed circuit board (PCB) sector.
_1.jpg)
Parts & Supplies | Pick and Place/Feeders
176391311 MOTOR SERVO RT AXIS 1-763-913-11 F130 SGMAS-04ACA41-E E1000 series accessories (X-AXIS MOTOR 1-763-437-11, Y-AXIS MOTOR 1-763-438-11, F-AXIS MOTOR 1-763-439-11, RT-AXIS MOTOR 1-763-441-12, RN-AXIS MOTOR 1-763-442-12, H-AXIS MOTOR 1-763-
_1.jpg)
Parts & Supplies | Assembly Accessories
176344012 SERVO MOTOR H AXIS 1-763-440-12 E1000 SGMAH-01AAA21H E1000 series accessories (X-AXIS MOTOR 1-763-437-11, Y-AXIS MOTOR 1-763-438-11, F-AXIS MOTOR 1-763-439-11, RT-AXIS MOTOR 1-763-441-12, RN-AXIS MOTOR 1-763-442-12, H-AXIS MOTOR 1-763-4
Technical Library | 2019-12-12 02:43:44.0
Today we discuss the reason that causes temperature humidity chamber to alarm,In most cases, the equipment alarm is caused by the improper operation in the process of use, which mainly includes following reasons:that are refrigeration system, temperature system and circulating system. First, Refrigeration system 1, refrigeration compressor overpressure alarm. If the refrigerant pressure exceeds the set value, it will stop and alarm at the same time. At this time, the fault must be eliminated and then manually reset. 2, short phase power supply, phase sequence alarm. When the external power supply of the equipment is out of phase or the phase sequence is changed, it will stop and alarm at the same time. 3. The circulating cooling water is short of water to alarm. When the water pressure of the cooling circulating water system is insufficient, it will stop and alarm at the same time, and it must wait for the fault to be eliminated and reset at the same time before it could run normally. 4, refrigeration compressor overheating alarm. When the coil of the compressor is overheated and the power supply of the line is not normal, it will stop and alarm at the same time. Second, Temperature system 1, the overtemperature alarm in the chamber. The sensors in the channel and the sample area are equipped with overtemperature protection devices, and there are also overtemperature protecter on the control panel. When the temperature in the working chamber exceeds the setting value on the controller, it will stop and alarm. 2. sample overtemperature protection. When the temperature in the sample area exceeds the protection temperature set by the controller, it will stop and alarm at the same time. The overtemperature protection of the sample is divided into upper limit protection and lower limit protection, which can be set according to the demand, Third,Circulating system 1. The alarm is caused by the overheating of the circulating fan. When the coil of the fan is over-heated, the alarm will be stopped at the same time. 2. The fan over-current alarm. When the current of the fan exceeds the allowable value, the alarm is stopped at the same time, and the normal operation can only be carried out after the fault maintenance of the overcurrent is completed. This is what we talk about today,if you have more questions,let us know.
Technical Library | 2018-11-22 05:21:52.0
VDR (Voyage Data Recorder) is an instrument continuously recording real-time data of ship body, including speech communication signal of cockpit, sensors data, alarm status and radar images, etc.. So what's types of storage devices may meet VDR's requirement?
A500, A600, A800 - 5, 6 or 8 top/bottom cooling zones. Heating System: Up to eight groups of top and bottom forced hot air convection heating zones. Patented heating plates in each zone uniformly transfer heat to the PCBs using forced hot air co
Training Courses | | | ESD Control Training Courses
Browse training and certification programs for electrostatic discharge (ESD) control in electronics assembly.
Training Courses | | | PCB Design Courses
The PCB design courses teach students the process, techniques and tools needed to design layout of printed circuit boards.
Events Calendar | Wed Jun 22 00:00:00 EDT 2022 - Wed Jun 22 00:00:00 EDT 2022 | ,
Empire Chapter Webinar: LIVE Action Reflow Focused Process
Events Calendar | Thu Jun 08 00:00:00 EDT 2023 - Thu Jun 08 00:00:00 EDT 2023 | ,
SMTA Workforce Development Webinar: PCB Design Courses and Careers in PCB Design
Career Center | La Grange, USA | Production,Technical Support
Are You Ready to Grow With Us? Grayhill, Inc. designs, develops and manufactures an extensive array of component and system solutions. We employ nearly 800 associates worldwide. Our LaGrange, IL headquarters (in the Chicago metropolitan area) is eas
Career Center | North York, | Engineering,Quality Control,Technical Support
GSM/EDGE, CDMA, UMTS cellular networks, WCDMA, Inukshuk networks, SS7, HSPA, TDMoIP, IP, TCP/IP, Ethernet, Messaging and Data Networks, Radio Prop
Career Center | TRIVANDRUM, kerala India | Engineering,Maintenance,Research and Development
System Integration, Software Configuration Project Implementation & Commissioning Installation and Servicing of CCTV,Access Control,Public Address systems, Fire & Alarm Security System, Biometric Attendance System. Language Skills-C, C++,UNIX,LIN
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/industrial-coating-systems/products/can-manufacturing-induction-dryers-and-heaters/ecodry-compound-dryer
. Open-door interlock switches Over- and under-temperature alarms and shut-downs Integral exhaust blower purges moist air from induction tube Easy installation, all electronics housed in common
GPD Global | https://www.gpd-global.com/co_website/pdf/doc/FLOwareGEMInterface_1.2.0.pdf
3.3.6 Related Variables, Constants and Events ..............................................................................19 3.4 ALARMS .........................................................................................................................................19 3.4.1 General Description
