Electronics Forum | Mon Jan 21 08:26:45 EST 2013 | ngineer
Bobpan, Thanks for the reply. I have been using Tep Vision, I'll see whether I was using GOTO 1 or 0, it may have been 0. I am running from central controller, and am doing a download database from the database utilities when making changes on
Electronics Forum | Wed Apr 11 00:40:19 EDT 2012 | ngineer
I have a problem setting up the LAE on my Quad 4c. I set it up for 0805, and it seems to work, although it rejects a lot of parts, at least it places "most" of them. I tried setting up on a soic14, and could not get even one to pass. I believe I h
Electronics Forum | Sat Aug 18 00:49:56 EDT 2012 | audere
When I see this on my QSP2 it is always caused by the nozzle not seating ideally but I tend to set my tolerances really tight. To test mount a nozzle and look at Z height. Now pick up the part (which in my case will suck the nozzle upward due to the
Electronics Forum | Sun Sep 09 02:24:04 EDT 2012 | audere
More lube on the O-Rings caused lots of problems. Nozzles would drop downward at times. So I pulled everything out and started from scratch. Testing 3 new Z-Rods, 4 used Z-Rods in good shape (replaced the O-Rings) and around 20 nozzles - the proces
Electronics Forum | Sat Jun 01 11:15:34 EDT 2013 | aemery
Delete the program and start over. I can't get a clear understanding the way you described the error, but it does sound like you have some kind of detent issue or a board stop programming issue. Depending on the configuration of your machine and th
Electronics Forum | Sat Jul 12 03:45:19 EDT 2014 | comatose
If you're getting quoted .045 seconds per chip, or .9 seconds per IC, one of two things is happening. The most likely is the supplier has two machines in the line, one placing small parts quickly, and one placing large parts slowly. The part will run
Electronics Forum | Tue May 12 14:07:34 EDT 2015 | joecurran
Hello g, I was alerted to your post by our marketing team. Yes, the Automove can run Fluidmove for Windows XP but only if the system does not have a downward looking camera and only if greater than serial number 3812. If it has a camera then the P
Electronics Forum | Sat Sep 26 03:21:58 EDT 2015 | aemery
Mervin, Love these machines, Speedline built about 3500 of them so I have lots to fix. Most issues come down to incorrect use or poor adjustment and alignment. Your description is a little vague, you didn't mention which direction the prints are of
Electronics Forum | Wed Jul 20 14:37:40 EDT 2016 | bpoydence
I started a new job about 6 months ago, and the screen printer is an Ekra E4. I have never used one before, but have used a variety of them and I have 13 years experience mainly in surface mount. I cannot seem to get consistency out of this machine
Electronics Forum | Mon Oct 24 05:43:52 EDT 2016 | zxcvb
I have many PCBs that use an AVR in SMD packaging, and since I frequently change the firmware in prototype boards, I'm trying to come with the best solution to program the AVR quickly and easily. The first approach was to have a standard header (2x5