Electronics Forum | Sun Nov 16 09:02:47 EST 2008 | davef
While we're unfamiliar with Swisstone, we accept: * Techspray Solder-Wik * Chemtronics Soder-Wick * NTE Solder Wick All of these [and Swisstone] look basically the same. We wonder if maybe they're all made by the same source and branded differently
Electronics Forum | Thu Nov 13 09:14:52 EST 2008 | raiders
Hi All, We encounter capacitor crack in the ICT, it contributes 2% of the failure. We are not sure whether these crack coming from the SMT. All these crack having the same pattern. Please refer to attached file. Anybody encounter the same thing befo
Electronics Forum | Wed Nov 19 03:53:24 EST 2008 | aj
Hi all, We are looking into getting xray on site. More than likely AXI in some shape or form. What sort of legal requirements etc. are we looking at? all replies greatly appreciated. aj...
Electronics Forum | Tue Feb 10 05:45:09 EST 2009 | muarty
Anyone, We have a fault on our BTU VIP98 reflow oven. At present NONE of the zones are heating up, even though all the SSR's appear to be working and we have voltage at the elements and the fans are all working. Anyone got any pointers? Thanks in ad
Electronics Forum | Fri Apr 03 14:42:08 EDT 2009 | rkevin
Looking for potential pastes to evaluate (success stories), and any and all paste evaluation procedures you may have used sucessfully to qualify a new product. Definition, slump, release, tack, voiding, reflow window, etc. Thanks for any and all h
Electronics Forum | Fri Sep 25 10:28:08 EDT 2009 | leemeyer
Are you running Q-soft software or is this an older machine running central controller ? Do you have seperate profiles set up for 0603 caps and 0603 resistors or just one profile for all 0603 parts. It sounds to me that you might be scanning to low a
Electronics Forum | Wed Oct 07 07:47:32 EDT 2009 | nagesh
Dear ALL, Which machine is the best cost effective in the Pre-Reflow stage.(Programming lead time/Inspection capabilities) Whether it is AOI from Omron or ViTech. Thx in advance for all your sincere postings. Cheers, Nagesh
Electronics Forum | Fri Oct 29 11:42:04 EDT 2010 | pfloh
For my opinion, this will not the end for you yet if supplier unable to provide you the rootcauses and corrections. I faced this more than 3 times within 2 years. All type of lab tests (SEM, FTIR,cross-sectioning,solderability tests, and etc.) They
Electronics Forum | Mon May 24 19:24:35 EDT 2010 | jry74
We bake all of our boards at 220 degrees F for two hours. This bakes out all the moisture. Blow off the parts prior to placing in the oven.
Electronics Forum | Tue Jun 01 15:06:40 EDT 2010 | thanh
I did. Nothing change. I can go in mount feed back and increase .5mm for all rotations(Lazer mount feed back), then it work. But all my parts go to camera will be off the oposite way.
