Electronics Forum | Mon Apr 18 12:06:03 EDT 2022 | dsmith
During the initialization process, the table will make small movements up and down, and occasionally go all the way up and back down again, then continue to bounce up and down maybe an inch of travel, it never completes initializing. I wasn't operati
Electronics Forum | Mon Apr 18 12:39:57 EDT 2022 | winston_one
Thanks for all comments. Process was adjusted normally, problem was in PCBs. Microsection of bare boards confirm that the copper thickness in troughholes was unsuffient, sometimes below 10 microns, on soldered boards where there were a problems durin
Electronics Forum | Fri Apr 29 15:17:54 EDT 2022 | glasscake
If the machine was working appropriately before the hard drive failure i would lean on the issue being a configuration issue. Lots of machines have options in their software for different sized motors, limit sensors, IO configs, ext. See if you cant
Electronics Forum | Mon May 09 19:24:53 EDT 2022 | rgduval
It's been a minute...but, does the My9 still have MOT boards in the computer cage? If so, swap the MOTz with the MOTx or MOTy, and see if the problem moves. If so, replace the motor controller board. If not, +1 on the encoder or Z-motor. Check fo
Electronics Forum | Thu May 12 12:59:54 EDT 2022 | spoiltforchoice
The most annoying thing about these boxes I have encountered is that nobody seems to want to keep using the same box and the same hook for more than about 5mins, some are easy to open, some make it easy to drop the setncil straight of the bottom and
Electronics Forum | Fri May 13 11:13:59 EDT 2022 | ilavu
We have all Universal Instruments placement machines and one of our customer provided placement programs as pick and place file for new job. Is there anyway to extract ascii(pick and Place) file from Juki placement programs with extension .E47 and .E
Electronics Forum | Mon May 23 12:55:59 EDT 2022 | proceng1
Unfortunately I was not able to import the file. My software outputs 3 files, including .BRD, which I never use. I thought it might be able to import it, but it just says that it doesn't recognize the format. I tried Allegra and a few others, but
Electronics Forum | Mon May 30 11:46:51 EDT 2022 | jojoled
You were right, that helped.....So If I enter all the data in "Compopnent dat" or Feeder data".....You can not delete any of that. If you want to delete anything unused, You have to be in Component data, then go to sub-menu : List Components, and del
Electronics Forum | Tue Jun 14 15:59:25 EDT 2022 | mikevb
Thanks! I just needed a response like that. I will do all that, and if it's still an issue, I'll change the x wagon encoder right? There are three encoders on the x wagon though? The white one on the x carriage, the white one on the x belt drive mo
Electronics Forum | Wed Aug 03 13:06:51 EDT 2022 | proceng1
I am a little lost on some of that, but here is what we do. The camera view has the package outline, including an orientation indicator. The operator has the camera step through the program, and checks that the outline and indicator are correct on