Electronics Forum | Wed Aug 09 04:20:19 EDT 2006 | Rob
If you kink the leads will you be able to insert it without flexing the board/moving any of the other components? Also these pin headers aren't always designed for this process so have you checked that it will take the elevated temperatures?
Electronics Forum | Wed Aug 09 16:46:49 EDT 2006 | nitro
We use the Tribol 930/100 Synthetic oil. Also, check the drive motor chain on the output end of the oven. I have seen the set screws back out of the drive gears, and it will kind of pop at times while running.
Electronics Forum | Mon Aug 14 13:16:26 EDT 2006 | SuMoTe
Speedline also sells 1 gallon and 5 gallon sizes too. I think the 1 gallon was about $140, I dunno about the 5 gallon though
Electronics Forum | Fri Aug 18 03:34:20 EDT 2006 | ridzal
i want to know about some basic details of materials in pcb such as CEM, FR1, FR2, FR3 and XPC.The use, advantages and also disadvantages
Electronics Forum | Tue Aug 22 12:44:28 EDT 2006 | russ
Cannot be done, no way to solder the heat pad underneath center. P.S. Rob also spells color wrong!!! must have been a real bad school!! How does the wave master do it? Russ
Electronics Forum | Thu Aug 24 12:09:35 EDT 2006 | Chunks
Now how did you know we were wave soldering BGAs onto a board that goes into a karaoke machine? Thanks for everyone's input. We currently use tacky flux, but I beleieve we will also look into screening paste onto the BGA as well.
Electronics Forum | Thu Aug 31 18:52:55 EDT 2006 | SWAG
Larry, I know some of the Quad stuff is also Samsung but don't know how that translates to feeders. I suggest calling Precision Placement Machines, Inc. They should know about 4c.
Electronics Forum | Wed Apr 11 02:44:28 EDT 2007 | Ronald
I am also interested in the manual. Could you send it to me? r.sinnige@anubiss.nl Thanks!
Electronics Forum | Thu Sep 07 11:22:33 EDT 2006 | scombs
We had similar problems with some of our products and found the root cause was our ICT fixture. The damaged balls/pads were always in a certain locations so finding the pattern helped. It also didn't help that the boards were ICT'd 10 + times.
Electronics Forum | Mon Sep 18 15:23:07 EDT 2006 | Brad Courtemanche
Crazy Question, but do you know who the board house is that is making the boards. We also use alot of flash gold and have noticed many problem with one particular board house.
