Electronics Forum | Thu Jun 14 21:48:41 EDT 2012 | kmots15
We work with a lot of larger boards over 24", haven't run into this issue yet. I agree with scott could be your board supplier if they are lower quality, from something as simple as unit conversions in CAD to dealing with different temperatures. A
Electronics Forum | Wed Aug 27 15:18:51 EDT 2014 | mrp
Hi. I decided to answer to your question, despite this is asked 2 years ago. I believe that my answer will be useful also for others, who visit Lean forums. I would recommend to use some proven MRP SaaS (cloud), because there are many such softwa
Electronics Forum | Mon Jul 02 18:40:33 EDT 2012 | joeherz
We used to have a Nuclean 324 that was running closed loop with a DI water recirc system. We also had problems with foaming that was solved with a relatively simple fix. We bypassed the final rinse solenoid so that it was always running. This allo
Electronics Forum | Fri Jun 29 15:57:24 EDT 2012 | stentech
This issue can be common on such large size boards. The newer laser we use today to cut stencils are generally accurate to +/- 5microns X and Y. Probaly way more accurate than your board which will have a +/- into thousands of an inch. Try send a boa
Electronics Forum | Thu Jul 05 16:41:40 EDT 2012 | stentech
It is very possible We do have lasers designed to cut upto 7feet long. However they are mainly backplanes.I would think this could be your issue although I still think them having the board would help. I am not sure where you are situated. If you wis
Electronics Forum | Fri Aug 03 10:18:36 EDT 2012 | pctech
Greetings everyone, I am trying to figure out away to clean our stencils by hand. Unfortunately, we do not have a stencil cleaner due to size and finance of our company. I am using Ionox to clean them daily.But the walls do not come clean. Is this a
Electronics Forum | Mon Aug 06 09:55:32 EDT 2012 | dyoungquist
Techspray makes a liquid called "Eco-Stencil SMT Stencil Cleaner" and also pre-saturated wipes by the same name. We spray the cleaner on the stencil and then use the wipes to clean the paste off of the stencil. Putting 1 wipe in each hand and rub
Electronics Forum | Fri Aug 17 17:23:21 EDT 2012 | processman
Hi, Looking for some experience from others regarding frequency of repair, maintenance etc on UIC Lightning Head spindles. We have a genesis machine for the last year and we are continually removing and repairing spindles due to the Vaccuum or b
Electronics Forum | Mon Aug 20 16:33:20 EDT 2012 | aelektronik
Hi Looking for a recommendation on a PCB manufacturer preferably from your own experience. For Small-medium series (up to few thousand boards) and prototypes. 4 to 8 layers with ENIG and 10mil Vias. Boards that are Real IPC Class 2 or 3 compliant.
Electronics Forum | Wed Aug 22 15:48:03 EDT 2012 | rmitchell
Hi, Our CP8 is down with this message. Parameter: EMG FjMcEmgservoEnable CAM(0),FjlSrvAxis Reset R=304087143 The machine error also has possible broken wire. None of the servo amps show an error they are all (bb) on the led read out We do not hav
.gif)
