Electronics Forum | Thu Jan 19 12:05:41 EST 2006 | daxman
We've checked the Amplifiers, and the optics and they seem to be finctioning just fine. The issue doesn't seem to be related to specific heads. The errors show up often, and on random heads. Do you think this could be faulty reverse theta motors?
Electronics Forum | Tue Jan 31 19:43:24 EST 2006 | Miguel Sangabriel
You may also make sure to use the adequate lubricants. _Have you made the 10,000 hours maintenance?
Electronics Forum | Tue Jan 31 21:15:27 EST 2006 | EX FUJI GUY
Hello, Please call 319-392-4674 8 to 5 CST. for all Fuji technical support issues. We have the best guys. WE are SMT Research.
Electronics Forum | Thu Feb 02 20:53:38 EST 2006 | ____
You guys hurting for money again Bill or Rex? Stop advertising and share your knowledge if you have any on the subject at hand.
Electronics Forum | Mon Feb 06 06:35:28 EST 2006 | dougs
Sr Tech could be right about the C-AXIS coupling, i've seen that happen before as well, although the noise happened when the cam was sitting still at 0deg, not when it was turning, the noise was from the motor hunting for position.
Electronics Forum | Mon Apr 03 07:32:56 EDT 2006 | cyber_wolf
I agree. If you put them back in the same place you should be fine. The way you measure/calibrate placing accuracy is by running PAM. This program determines any error in the shafts.
Electronics Forum | Fri Apr 21 03:20:04 EDT 2006 | kent_peterson
I think your refering to the sleeve. It is held in with loctite 262 or something. You can set up a bearing puller with a socket to pull it out around station 2-3. Fuji will drop the whole gear out to do this. Too much for a few sleeves.
Electronics Forum | Thu Jan 19 05:38:26 EST 2006 | lozlloyd
A bit of a long shot but ... Does any know if Reddish Electronics � SM1500CXE oven is suitable for lead-free soldering ? i.e Can it handle the elevated temperatures ? TIA Steve
Electronics Forum | Thu Jan 19 16:21:03 EST 2006 | geocominc
Does anyone know where we can find a FUJI IP3 or CP6 part data download site or link? Thanks in advance
Electronics Forum | Mon Jan 23 05:43:43 EST 2006 | aj
what programming software are you using. I switched to flexa and I got a file of part datas from the engineer, if you like I can forward them to you. aj