Electronics Forum | Tue Oct 21 22:42:50 EDT 2008 | fujiphil
What error displayed after the vision process? If all the parts processed at Head 1 did not pass the vision, try to adjust the scan speed of the camera1. kindly send the error code. Jep
Electronics Forum | Thu Oct 23 00:43:30 EDT 2008 | stanyserrao
Light Units are replaced with new if the problem of lights then it will not vision process the nozzle center measrement and resolution Jigs too.. Jig is meauring in trace mode and identifiying all leads which are fine fitch. But a 1206 resistor is
Electronics Forum | Wed Oct 22 01:14:04 EDT 2008 | maheshbs
Conveyor is installed after AOI machine. After inspecting the board in AOI it sends the signal to the conveyor whether it is Good board or Bad board.
Electronics Forum | Tue Oct 21 16:18:35 EDT 2008 | nickh
Hey all, I'm looking for a place to get the solder from my wave flow tested, any suggestions? Thanks!
Electronics Forum | Thu Oct 23 11:23:46 EDT 2008 | muarty
Our solder bar supplier provides this service free of charge. I also use an independant lab in the UK for testing too. Well solder suppliers are hardly going to tell you that you have an issue with solder they supplied are they..........?
Electronics Forum | Thu Oct 23 16:31:50 EDT 2008 | blnorman
Bodycote is an independant test lab that can run ICP impurity analysis. We used them a few years back to evaluate 2 different bar and wire suppliers.
Electronics Forum | Mon Oct 27 23:25:56 EDT 2008 | davef
Each thermal cycle decreases the thickness of the OSP. So depending on the material, fabrication method, and blablabla; after one thermal cycle we'd expect the OSP to provide adequate protection for a couple of days. After that, you may need a more a
Electronics Forum | Wed Oct 22 19:42:12 EDT 2008 | davef
While you're waiting for others to reply, search the fine SMTnet Archives for threads like http://www.smtnet.com/forums/Index.cfm?CFApp=1&Message_ID=40040
Electronics Forum | Mon Nov 03 17:18:04 EST 2008 | dougbebs
Inovaxe has developed a unique inventory control solution for electronic manufacturers. There is quite a bit of information on the web site http://www.inovaxe.com.
Electronics Forum | Tue Oct 28 09:49:39 EDT 2008 | sys_steven
italy MIRTEC EUROPE LTD MIRTEC EUROPE Ltd. P.O.BOX 248 PLYMOUTH PL5 4WW +44 (0) 1752 206394 +44 (0) 79681 62596 Sales@mirteceurope.com www.mirteceurope.com