Electronics Forum | Thu Oct 20 17:59:39 EDT 2011 | davef
inspection arrow Brady and Shercon are two brand names. People like Digi-Key and All-Spec sell them
Electronics Forum | Thu Oct 20 19:18:22 EDT 2011 | eadthem
Something also to consider is, if you don't need to remove the mark, look in to a uniPOSCA paint markers (water based paint). For us we find the arrows take so much longer than the paint, just poping the cap and dotting the problem and moving on.
Electronics Forum | Fri Oct 21 11:30:56 EDT 2011 | remullis
Thanks I got some coming from BRADY. These will have to be removed. Anyone ever needing the part # its, BIA-RD 2.00 bucks a sheet.
Electronics Forum | Tue Oct 25 15:03:48 EDT 2011 | sjs2303
Hi Bert, For your second issue, are the tools well lubricated? If not the Midas head can fail to grab the tool and can generate the z motor error. Doing this followed by a base-centre level measurement should resolve your problem. Steve
Electronics Forum | Thu Oct 27 16:24:18 EDT 2011 | davef
SJS2303: That's our first thought also. We agree that dealing with fly-shit does not worth the amount of time it takes.
Electronics Forum | Fri Nov 04 21:57:37 EDT 2011 | machinehead
When I'm Tearing down a Job, And removing the tape and reel from Agilis Feeder. Their is a gap of at least 10-12 Parts. Unpicked parts, When the knife on the feeder spreads the tape aside. and leaves this gap of feel falling parts.
Electronics Forum | Thu Oct 27 20:40:23 EDT 2011 | tech1
What equipment are you talking about? That would help My piece of advice would be clean, clean and clean then clean some more
Electronics Forum | Mon Oct 31 21:08:19 EDT 2011 | davef
Second, make sure your fiducial data for pick and place programs are built from CAD data and NOT manually at the machine.
Electronics Forum | Wed Nov 02 15:50:22 EDT 2011 | wrongway
Hello all do the maintenance when spicified don't put it off have some spare parts on hand keep it clean follow the process ok 4 things
Electronics Forum | Thu Nov 10 16:09:15 EST 2011 | davef
Third, if component placement is off, fix the machine (i.e. calibrate, check cleanliness of lenses and sensors, damaged nozzle) and not the CAD locations.
.gif)
