Electronics Forum | Mon Jul 30 11:05:57 EDT 2018 | dekhead
Failure on PCIB40#3; try swap with PCIB40#5. Will need to change addressing (jumpers or rotary SW).
Electronics Forum | Mon Jul 30 17:31:59 EDT 2018 | dekhead
That error message is keyed by a hardware (soldered) link on the backplane board of the Y1 (motor controls), through direct cable to PCIB40#3... check connections both ehds; possibility of multiple PCIB failures?
Electronics Forum | Tue Jul 31 17:24:33 EDT 2018 | erici
There is a hardware dongle at the back of the machine. Is this the hardware link (key) you are referring to? Ok i will check the cables to PCIB40#3. Thanks again
Electronics Forum | Wed Aug 01 09:03:54 EDT 2018 | bukas
check 12PL14, 12PL16, 12PL17 connectors. also, there are few jumpers on backplane of Y1, check them too. a single broken wire can get you this error, so my bet is cables.
Electronics Forum | Thu Aug 02 16:47:37 EDT 2018 | erici
Thanks for all your help guys. The problem ended up with the parallel port where the hardware key(dongle) was attached. The cabling from the pc to the parallel port at the back of the machine was defective. Cheers
Electronics Forum | Tue Jul 31 04:43:19 EDT 2018 | benny
We have 10 boards need prototype, UL certificate is necessary for us. Better ROHS. have any recommendations
Electronics Forum | Mon Aug 20 04:14:59 EDT 2018 | pcbcart
You may try PCBCart, it's fully ISO9001:2008, UL and RoHS certificated. Certificates can be found on page https://www.pcbcart.com/pcb-capability/certifications.html
Electronics Forum | Mon Nov 19 02:22:28 EST 2018 | davis
Hi, I highly recommend you to choose http://www.pcbnpi.com. The guys provided very professional service on my new and old projects.
Electronics Forum | Mon Nov 19 06:58:17 EST 2018 | davechow
Hi Benny I'm not sure if you still are active on forum or not,if yes,please contact me(sales7@multech-pcb.com),I think we are your reliable option
Electronics Forum | Mon Nov 19 07:52:46 EST 2018 | mermarinc
Choose UL & ROHS PCB manufacturer that have improved EMS capabilities, strong component sourcing, material procurement, effective vendor management and testing programs for a defect-free batch of production.
