Electronics Forum | Mon Apr 15 17:49:56 EDT 2019 | davef
Are you sure that the rails are perpindicular to the solder pot? Everything looks torqued ---{Or maybe it looks torqued because of the light reflections being at a different angle than other things]
Electronics Forum | Mon Apr 15 18:29:26 EDT 2019 | slthomas
I want to say that waaaayy back when we had an issue like that and it was time to clean the pot. The operator would speed the pump up over time to compensate but it only really helped in the middle of the wave.
Electronics Forum | Mon Sep 23 02:06:06 EDT 2019 | sssamw
You need thermal couple at the location where insufficient solder occur, it would tell you the true story.
Electronics Forum | Wed Sep 25 10:50:39 EDT 2019 | dwl
what am I looking at int he picture? is this a glass plate running over the wave?
Electronics Forum | Fri Apr 12 08:44:25 EDT 2019 | kgarlapa
HELLO GUY, We are using kanetic conveyor 13inch size. The conveyor belt moves reverse direction when pcb comes. what could be the problem? Regards,
Electronics Forum | Fri Apr 12 08:51:12 EDT 2019 | kgarlapa
We are using kanetic conveyor 13inch size. The conveyor belt moves reverse direction when pcb comes. what could be the problem?
Electronics Forum | Tue Apr 16 10:04:20 EDT 2019 | kgarlapa
Thanks for the reply davef. Can you please let me know which wire should i swap. wires-5set from gearhead box: white, black,yellow, blue,blue.
Electronics Forum | Tue Apr 16 13:01:10 EDT 2019 | slthomas
Is it possible that the conveyor controller card has the capability to switch direction with something simple like a jumper shunt?
Electronics Forum | Tue Apr 16 13:32:36 EDT 2019 | slthomas
Another question: After the conveyor starts running, when you trip the sensor at the other end, does it stop running?
Electronics Forum | Tue Apr 16 15:51:34 EDT 2019 | kgarlapa
we don't have a jumper shunt in this conveyor. This conveyor belt running forward direction since 5 years but all of sudden change to reverse direction. Is this any software issue? Note: Both side sensors are working fine