Electronics Forum | Thu Mar 28 17:44:47 EST 2002 | terrapin
Did anyone check where UIC aquired there cameras from. The control cards - where did the components come from. I would go on, however....... Sorry to say - there is nothing "Made in America". Many items are "Manufactured in America" with compoents f
Electronics Forum | Sun Mar 24 16:53:44 EST 2002 | mikestringer
We place a similar square pin style of connector on one of our products. The connector is a 22mm high HW series from Samtek. We have a Yamaha YVL88 MK1 and YV88XS set up to handle them (Yes they are rebadged as Philips machines in some markets). No
Electronics Forum | Fri Mar 22 17:41:53 EST 2002 | dougt
Based on a previous question, I'm interested in learning about some of the strengths/weaknesses of machines in the pick and place industry. I'm not looking to buy a machine so I'd appreciate it if the reps would stay out of it, I want to hear from t
Electronics Forum | Mon Mar 25 18:34:09 EST 2002 | bayanbaru
What are some of good pratices or poka yoke method that can be implemented to eliminate missing component. At the model assembly operator are required to take different components from the bin boxes and then assemble onto the product. Occasionally, a
Electronics Forum | Tue Mar 26 19:23:44 EST 2002 | sy_koh
I am looking a stencil cleaner machine. My co. is ISO 14000 certified ans using no-clean process. I am looking at various options. 1) Water cleaned Vs solvent 2) Ultrasonics Vs spraying. I had also the intention to use this machine to wash wavesold
Electronics Forum | Thu Mar 28 17:54:57 EST 2002 | slthomas
I realize that this is sort of off-topic, but do you have scads of solder beads (mid-chip solder balls, whatever you like to call them) with that stencil design? If not, would you mind sharing which paste it is that you are using? Email if you like
Electronics Forum | Wed Mar 27 18:23:01 EST 2002 | kmorris
Does anyone have experience doing conformal coating over Plastic BGA in High-Rel PCB assembly? Is underfill necessary to avoid problems with entrapped air, etc? Our application is a 17x17mm BGA, 256 I/O. We are assembling with a water soluable pas
Electronics Forum | Tue Apr 02 11:21:46 EST 2002 | BTaylor
davef I assume this question is for my reply and me. We used a dexter\hysol underfill and a Camalot 5700 to dispense.Single line technique next to a small IC with 14 bumps around the perimeter.The conformal coating was applied with a small brush aro
Electronics Forum | Tue Apr 02 22:52:38 EST 2002 | davef
Tks BT Can't be many places tougher than automotive, 'cept maybe oil field, down pipe. We use Dexter Hysol flow underfills for both 1 thou and 3 thou gaps, but they wouldn't come close to filling under a BGA. Most BGA are sitting about 16+ thou fr
Electronics Forum | Thu Mar 28 10:11:00 EST 2002 | cyber_wolf
I use a .059" copper clad sheet of FR4 that I bought from one of our board houses. It has not started to delaminate yet, and it has been through our ovens several hundred times. I am not sure what the life expectancy of a thermo-couple is. I am not 1