Electronics Forum | Mon Dec 29 21:22:48 EST 2003 | Dean
SPM-AV is a very versitle printer. I have one that is currently handling a 23.5 X 16.1 inch board. The print stroke has been increased to 21.3 icnhes. Again, very flexible machine. We may have two for sale if interested. Email me at idwitheld@com
Electronics Forum | Fri Dec 26 13:35:14 EST 2003 | fpcb
hi, When I start a MPA-80 ( NM 2529T ) I have a 4600 error, ( 1 block stop ) , I check the covers and the pressure : all ok. I monitor the head I/O address 012 and the relative bit 6 is responding when I open the covers. All seem ok BUT the error
Electronics Forum | Wed Dec 31 08:40:28 EST 2003 | tommy
The 1block switch in front,rear & air down sensor are connected in series. Another suggestion is to initialise the setting.Make sure you have a copy of the initial data before doing it. Tell us what is your finding.Maybe you already have a solution.
Electronics Forum | Fri Jan 02 05:40:20 EST 2004 | p.LAKSHMANAN
cALIBRATION OF SOLDERING IRON DEPENDS ON THE USAGE AND AGAIN DEPENDS ON THE PERFORMANCE.NORMALLY U CAN FIX THE CALIBRATION INTERVAL AS 3 MONTHS (OR) 6 MONTHS AND ANALYSE IF THERE IS ANY SUBSTANTIAL DRIFT IN THE READINGS(BETWEEN ACTUAL AND DISPLAYED).
Electronics Forum | Wed Jan 14 13:53:40 EST 2004 | Sue DeLadi
The current manufacturer for the Kleenox P is Alpha Metals. Qualitek International was the first manufacturer of Kleenox P and provided the product to Electrovert/APA. The Qualitek product is Super Deox 1. We believe the formulation was changed in b
Electronics Forum | Fri Jan 02 13:31:42 EST 2004 | equipsearch
I am hoping that someone can help with this. Am attempting to source "used"/refurb 130kv Hamamatsu x-ray tube and controller (for a CR Tech machine). Am having difficulties in locating a source. If anyone has any ideas, it would be greatly appreci
Electronics Forum | Tue Jan 06 11:47:59 EST 2004 | equipsearch
TL IPS: I am having problems replying to you directly. Here is the info on the X-ray machine in question. We definitely need to replace the tube and controller. We are not "hell bent" on a Hamamatsu replacement. If you have something else availa
Electronics Forum | Tue Jan 20 17:48:45 EST 2004 | Brian W.
Photon Dynamics is out of the X-Ray business. Try Yestech. They have a number of former CRT and Photon people. Had a similar problem with a CRT 2000 one time. You have to replace both the tube and controller. If I remember correctly, they are m
Electronics Forum | Fri Jan 02 14:04:56 EST 2004 | jjwhite
Has anyone had any experience with 60/40 Sn/Ni(300 u in.) over Ni(300 u in.)? If so, what kind of solder issues might exist with 63/37 Sn/Pb reflow? Is a different paste needed? Also, what is the benefit of using the same platings with a top plating
Electronics Forum | Mon Jan 05 00:30:07 EST 2004 | Arthur Yang
Hi you there, Do you have any experience upon the shelf life of PCBA which passed 100 cycles of liquid to liquid thermal stress test, 125 to -35 centigrade for 15 minutes and 5 seconds of transfer time from 125 to -35 centigarde. Will apprecia