Electronics Forum | Wed Nov 09 11:53:03 EST 2005 | rlackey
Hi Pavel, http://www.bartec-systems.com/packagingsecurity/tc1100.html We we're quoted around 350 Euro's for one of these - a Datalogic TC1100-1100, incluiding software & manuals. We were going to mount it on an AOI system, but never got around t
Electronics Forum | Wed Nov 09 13:46:07 EST 2005 | russ
Anybody out there have any experience with the above? We are looking into buying one of these things. We need to process large thin boards to small thick boards both pb and pbfree solders. Components will range from uBGA and CSP to ????? It is a
Electronics Forum | Mon Nov 14 10:10:52 EST 2005 | davef
When soldering your full tin (no lead) and Pb95/Sn5 solder components, you need to modify your PbSn reflow recipe to compensate for the higher melting point of the changed solder alloy [with your Sn62/Pb36/Ag2 solder paste] on those component leads.
Electronics Forum | Thu Nov 10 14:38:27 EST 2005 | Proy
Does anybody here have any information or experience with a DEK249 DEK ALIGN II system made by Cybernetics robotics? This system moves the table to align it to reference images. We are getting an old system working, it is mostly there, but we are ha
Electronics Forum | Thu Nov 10 16:15:52 EST 2005 | 1st Article
Sumote, I suggest DESCO ESD safe het gloves, these gloves have a polyester exterior fabric with woven conductive fibers to ensure static protection. Inner lining constructed of material for use in heat assembly processes, can with stand 200�F maximum
Electronics Forum | Thu Nov 10 16:19:42 EST 2005 | 1st Article
Dear Sumote, I would suggest DESCO ESD safe heat gloves, we are using them at our facility, these gloves have a polyester exterior fabric with conductive fibers to ensure static protection. Inner lining constructed of material for use in heat of 200�
Electronics Forum | Thu Nov 10 23:50:34 EST 2005 | pyramus
Hi everybody! I would like to ask some advice which kind of EMI shielding process is easy to use, economical and at the same time efficient. I've been doing research for different kinds of shielding process to be used in our product. Can anybody gi
Electronics Forum | Fri Nov 11 10:42:59 EST 2005 | rlackey
Thanks Dave, I thought it tasted different - I just put it down to having not travelled well. I'm off to find some Trappist Westvleteren 12. I would ask if there is anything you don't know, but I don't want my illusions (or delusions!) of your o
Electronics Forum | Fri Nov 11 18:06:15 EST 2005 | pyramus
Thanks for the reply everybody!!! It is a compact RF device it is currently being designed our R&D is asking some suggestions what kind of shielding would be best for it. It is quite compact that we will be using 0201 chips on it. Anybody have exper
Electronics Forum | Fri Nov 11 04:06:46 EST 2005 | arnold
we are manufacturer of molded type transformer. we have a trim and form process and its damage the pins of our units. the TIN insulation was being damage so we decide to immediately solder (wave soldering) the units to avoid oxidation. my question is
