Electronics Forum | Tue Mar 10 11:39:10 EDT 2009 | bobpan
Craig, Try this.... Go into 'machine-calibration-transport' then click on 'touch stop'. Reteach your board touch stop x for both gantries (if you moved both touch stops). If the board still does not reach the touch stop.....teach 'Board Positioning S
Electronics Forum | Thu Mar 12 01:29:53 EDT 2009 | mika
Hi everybody, Can anybody out there help me with this? I have a Jot conveour with SMEMA interface and and I need to "hook up" this to a Fuji conveour (CP6). The electrical drawings of the SMEMA I alreday have (IPC-SMEMA-9851), but I am hoping for a
Electronics Forum | Thu Mar 12 10:25:06 EDT 2009 | smt_guy
I have Through Hole Assembly Boards that require Conformal Coating but the customer did not specify which area or parts should not be coated. Upon asking them they are also not sure about it. I have Transformers, PLCC's on a socket, IC's on a Socket
Electronics Forum | Thu Mar 12 13:20:07 EDT 2009 | ck_the_flip
Before anyone tells me to search the fine archives, I already did! I typed Sn100c and Reflow, and nothing came up. Anyway, any of your folks out there run Sn100C across the board - Reflow, Wave and/or Selective, and Hand-Soldering? If so, please p
Electronics Forum | Fri Mar 13 15:00:18 EDT 2009 | dman97
Can somebody take a look at this screen shot and tell me what it is supposed to mean. Every time I try to transmit this program to my CP642 machine I get this error. Does any one know what this error means and how would I correct it? Thanks for yo
Electronics Forum | Tue Mar 17 19:39:48 EDT 2009 | dman97
Never mind. I figured it out. It seems that the part numbers I assigned were too long. I shortened them to 15 characters and it worked. I find it strange that the p/n's were too long, but Flexa did not catch this as an error, and instead proceede
Electronics Forum | Tue Mar 17 16:21:20 EDT 2009 | gregf912
I have not played with ProSMT software but I have used both MCS and F4G. MCS was good for its time, 15-20 years ago, but F4G is much better and easier to use. The windows interface works well and F4G and has optimizers for Cp, IP, QP machines. F4G wa
Electronics Forum | Tue Mar 17 16:09:25 EDT 2009 | gregf912
For the IP3 to reliably place BGAs the machine needs the 4800 vision card and type 12 camera. From the problems i see here you must have the 4400 card and a type 8 or 9 camera. It would also seem that a calibration is in order. I have calibrated and
Electronics Forum | Wed Mar 18 15:16:09 EDT 2009 | wayne123
I was told I needed to figure out what kind of fire extinguisher we needed for our Smt line. this includes 2 topaz pick n places, and a reflow oven. I also have to figure out what kind of extiguisher to use at our Wave machine. can anyone tell me w
Electronics Forum | Fri Mar 27 09:37:15 EDT 2009 | cyber_wolf
There are pem nuts on the back side of the teddy bear face. One of them probably fell off and either shorted your main board or it is lodged in the belt and pulley that drives the advancing wheels. Take the front part of the feeder off that has the t
