Electronics Forum | Fri Sep 07 17:03:10 EDT 2012 | burb1999
I would guess the FFX cable as metioned with the sensors inside the midas, that could of been damaged by a part or? Not a big deal to replace just remember how many turns the milar harness goes around. Also just loosen the rear screw there is a slo
Electronics Forum | Wed Sep 18 15:40:12 EDT 2013 | pankalaitz
Hello, we have problem with indicator. When we manually install a spring loaded tool into the Midas head, the force remain at 180. We can't use spring tools. Can you advise me how can we calibrate the force indicator and what else should I try to fix
Electronics Forum | Thu Sep 19 10:27:10 EDT 2013 | rgduval
I believe there is a force calibration menu option in the maintenance menu. From the main screen, choose exit to maintenance to get into the maintenance menus. If you're still having force issues afterwards, you'll want to start hunting for broke
Electronics Forum | Tue Jul 17 08:20:03 EDT 2012 | rosborne
Hello Jorge, We offer both a large board AOI and SPI system. It is our Spectra platform. This system can go up to 24" x 36". Please feel free to call me with more questions. Best regards, Richard Osborne North American Sales Manager - Machine Vis
Electronics Forum | Thu Jul 19 10:53:47 EDT 2012 | engineerjim
We currently have every operator of our X-Ray equipment wearing a personal dosimetry badge. I've been a part of other organizations where just the dosimetry badge was place on the machine itself. What's the general consensus on that and/or where ca
Electronics Forum | Thu Jul 19 18:25:42 EDT 2012 | boriskilk
We have picked up a new customer who is insisting on Ionic cleanliness less than 6.45u grams/cm2 when measured in accordance with OPC-TM-650 Method 3.26.1 with measurements made immediately prior to solder mask application. This is the first request
Electronics Forum | Fri Jul 20 23:22:47 EDT 2012 | haiae
Hi every one, I'm looking for a Renco Encoder P/N77676-295 for one servo motor of my Contact 3AV-80 machine. If any one know where can buy new one for replacement please help me. I need also any spare parts for contact 3AV machine. Please drop me an
Electronics Forum | Tue Jul 24 17:54:14 EDT 2012 | tombstonesmt
Anyone placing any type of masking material die cuts with SMT equipment? We currently manually place a enormous amount of polymide 1/4 inch dots. Looking into automating this process. We already place 2d labels so doesn't seem to far fetched. Any sug
Electronics Forum | Wed Aug 22 12:48:47 EDT 2012 | tpatrickwalsh
They are using the method where scored boards are separated using a rotating wheel / blade. I realize this is not the best process, however these capacitors are more than 10 mm from the edge of the board. From some reading online I think that means
Electronics Forum | Wed Aug 22 13:18:50 EDT 2012 | rway
I also forgot to mention that the pizza-slicers you are using can get out of spec and may need periodic calibration. By cutting too close, these can over-stress your pcbs as well. Do you only see this problem at one cutter or does it matter? Also,
